Dear Akbar Mastouri , thin films of PTFE have been deposited over multiple substrates, including glass, by means of pulsed laser deposition (PLD) and sputtering techniques.
From your query, it is difficult to know what the Nano@ PTFE complex actually is, probably you are referring to a nanocomposite, where some sort of nanomaterial is dispersed in a PTFE matrix. Depending on the nanomaterial´s nature and concentration, it could have an effect on the processes of ablation/sputtering and/or the deposition conditions. The best way to fine tune these parameters for your material would be by trial and error tests with a real sample of your Nano@PTFE complex, using the parameters for PTFE as starting point.
The following research works are publications about different PTFE thin film deposition over glass, that might be useful for your work, please, have a look at them:
Article Superhydrophobicity of polytetrafluoroethylene thin film fab...
Article Fabrication of Transparent Superhydrophobic Polytetrafluoroe...
Article Deposition of PTFE thin films by ion beam sputtering and a s...
Article Transparent and super-hydrophobic properties of PTFE films c...
Hope this helps. Good luck with your research work.
I meant exactly superhydrophobicity. Most PVD methods(E-beam, PLD, Sputtering) usually use a single material such as PTFE. I wanted to know that could be layered PTFE with ZnO at the same time? Or it should be used in two steps. Because there is a different evaporation temperature.
Dear Akbar Mastouri I think that Manuel Gómez already suggested some of the mostrelevant references with respect to your question. If you are looking for potential collaborators in your field of research you can try to find suitable researchers right here on RG. For example, search for terms like "superhydrophobic techniques", "hierarchical structures" or "Nano@ PTFE" and then click on "Researchers". This will certainly provide you with a few names of RG members who are working in closely related areas. You can then send them a message directly via RG.