I need to validate my simulations results of 113 GHz phased array antenna with ANSYS HFSS.

My design and simulation were at CST MWS. This design inculded 32 indendtical independent lines with 28 microstrip patch that were multiple by Taylor amplidute coeffients distribution for SLL=-30dB and 32 different independent inputs

and the CST MWS was computed the total influence of all inputs together. Each input signal was multiple by suitable Taylor amplidute coeffients for SLL=-30dB by the CST.

How can I update the HFSS that it will do the same as the CST?

so each input signal will be multiple by the same Taylor coeffients and the HFSS will add all influences of each inputs together.

If you can, send to me a YouTube example.

Thanks a lot.