Why the absorbance increase during a degradation (oxidation electrochemical) process using an organic compound? The following parameters were used: Current Density Applied = 200 mA cm-2 , Electrolyte Concentration = 1.8E-3 molL-1, BDD anodes, support electrolyte = K2SO4 0.1M.
Hi,
Depend on the process.
For example, look:
Environ Sci Technol. 2001 Jul 1;35(13):2698-703.
Partial degradation of phenol by advanced electrochemical oxidation process.
Hi, Nazir,
please, specify the organic compounds, resp. your system under study.
Libuse
Hi, Libuse
I'm working with oxidation electrochemical of carbofuran ( systemic insecticidal nematicidal carbamates of the chemical group known by the chemical name 2,3-dihydro-2,2-dimethylbenzofuran-7 methylcarbamate) using reactor type pass flow. At the beginning of the degradation process the formation of some intermediates carbofuran occurs. The expected would be a decrease in absorbance by UV-Vis and not an increase!
- Badges
- Science topic
- Similar topics
- Chemistry
- Electrochemistry