The reason for increase in coke moisture?operation or coal or both?

More Ran Bahadur's questions See All

Procedure for test % non volatile matter @120 deg. & viscocty in B4 cup @30 deg of " ultima eco epoxy primer"?

procedure for test % non volatile matter @120 deg. & viscocty in B4 cup @30 deg of " ultima eco epoxy primer"

07 August 2017 8,201 0 View

Iron ore characteristics for sinter & pellet plant?

06 July 2016 8,958 5 View

What is the range of Magnetite, Hametite, Goethite etc. for Sinter Plant and Pellet Plant of iron ore mineralogy?

What is the range of Magnetite, Hametite, Goethite etc. for Sinter Plant and Pellet Plant in iron ore mineralogy? Pls if anyone know then send me?

06 July 2016 2,215 0 View

If one iron ore is good for sintering process as per mineralogy but not suitable for pellet plant why? in the respect of Mineralogy?

06 July 2016 1,022 0 View

How much non-coking coal, we can add in coal blend for coke making in stamped charged plant, and how?

can we add any catalyst, which is very cheaper for this purpose at industrial level?

02 March 2016 6,009 7 View

How balancing the heat energy in sinter plant?

Heat balance in sinter plant?

02 March 2016 9,849 4 View

How we simply calculate that combustion of 1 kg of coke to generate heat in degree centigrade?

1 kg coke = ? deg. centigrade.

02 March 2016 2,701 6 View

The relationship between CSR & CRI of coke is:---------- CSR+CRI= 80 to 90. is it true?

if any paper regarding this please share with me.

02 March 2016 8,839 4 View

In a Coke oven plant, how does one reduce the moisture content in the coke?

please suggest , chemically (with related to coal), physically? I am getting fluctuation in coke moisture regularly, pls, suggest appropriate reason?

31 December 2015 4,085 19 View

What is the reason for current dropping in OER , LSV curve?

I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...

10 August 2024 3,629 1 View

What may be the reasons for failures of Tube toi Tube Sheet Joints in Boiler Drum ?

We have observed that tube to tube sheet joint leaked in our boiler and needs to overcome same by knowing the root cause.

08 August 2024 3,161 0 View

What is the problem with these tissue culture plants?

All plants are green but some of these plants becomes yellow. I did not found any reason. Please help me to find out the real problem.

01 August 2024 589 4 View

Reason for discontinuities in my Band structure?

Hey All! I am wondering what might be wrong with my band structure. I did the calculations using VASP and plotted the results using Origin. Although I have tried changing various input...

25 July 2024 2,920 11 View

Is it fare for editors of reputed Journals to put on hold manuscripts more than six months without review updates, Are they harassing researchers?

It is being seen that Editors of some reputed Journals are putting on hold the manuscripts and not updating review states even passing more than six months from submission. Researchers are...

24 July 2024 8,596 2 View

Has anyone tried freeze flow samples in -80C freezer or liquid nitrogen before processing?

Our lab has some radioactive cell samples that need to be kept frozen for at least 30 days before flow analysis. For some reason, the samples stored in liquid nitrogen did not perform as well as...

15 July 2024 9,975 1 View

What’s the cost of maintance of inactive coal fired plant of 1500 a mw with a chemney of 354 meter high?

One plant was closed it is uncertain what would be the cost of maintaining the infraestructure as industrial heritage. Any idea?

09 July 2024 7,969 0 View

My Cyclic voltammetry curve doesn't show cathodic peak of Cu2+ to Cu+. how to solve this problem?

I performed CV of Cu-MOF in a buffer solution of pH 8, and we did not find any peak corresponding to Cu2+ to Cu+. What is the reason behind this? Please give your valuable suggestions.

08 July 2024 2,388 4 View

Hello, I’m growing three species of microalgae under heterotrophic and mixotrophic conditions. Both the two turned yellow?

What could be the reason for mixotrophs to be yellow too instead of green? Thank you

08 July 2024 594 2 View

My Research Survey Question ?

I am pleased to extend an invitation to experts in the fields of Cybersecurity, Computer Science, Computer and Electronics Engineering, Mathematics, and Operations Research to review and provide...

04 July 2024 6,132 0 View

Nilu Kumar Popular answer

post carbonization of coke for quenching is mainly responsible for moisture in coke.Dry quenching of coke is favorable for low moisture in coke (

Nilu Kumar

Andrii Koveria

Coke moisture depends only on how the quenching method applies - wet (

Mahesh Kumar Sharma

Dry quenching of coke is the best solution