Source methane concentration measurement from a leakage methane concentration?

18 December 2023 1 6K Report

I have an unknown concentation source of methane. With a hole the methane is diffusing to the air. the air methane concentration just outside the lekage is 120 ppm. Can I assume the methane concentration inside the source with any formula?

Md Raihanul Hoque

thank you very much

Badges
Science topic

More Md Raihanul Hoque's questions See All

Can we mark 'EFL Learners shifting from general digital to AI technologies' as technological transition?

After COVID-19 it has seen that EFL learners technological affiliation has raised. In addition, in the post-COVID period learners started to engage AI technologies like ChatGPT while learning...

08 August 2024 8,964 4 View

How to convert g/kg Humic acid dose to kg/ha?

I used humic acid at 0.044 g/kg soil in my pot experiment. But finally, I have to recommend kg/ha. Each pot's soil weight was 11 kg. What is the solution?

02 August 2024 7,186 6 View

Bangladesh government's reported plan to use lethal force against protesters? We need help Urgently ?

Please Help Us Urgently

01 August 2024 711 1 View

"How has Leader Sheikh Hasina's government allegedly responded to student protests, including the reported killing of over 500 students ?

"How has Leader Sheikh Hasina's government allegedly responded to student protests, including the reported killing of over 500 students, as well as arrests, custody, remand, and the involvement of...

29 July 2024 2,181 7 View

Can a photocatalytic degradation of methylene blue from red mud be pseudo- zero order kinetics?

My photocatalyst from solid waste red med. Dye is methylene blue My all parameter study is showing zero order. How to prove it further that the reaction in zero order?

29 July 2024 7,404 1 View

How to calculate pseudo order kinetics?

I know the rate law. But for my photo-catalytic experiments, first 90min is adsorption (dark) and next 150min is under UV light (total 240min). How to remove the adsorption part for calculation?...

21 July 2024 8,807 6 View

How can I calculate spin texture using Quantum Espresso for non-colinear case ?

I want to calculate the spin texture for the electronic band structure obtained from SOC calculation. Is there any way for calculation of spin texture using quantum espresso??

19 July 2024 8,571 1 View

The reason for breeding Loxp mice with FLPe mice?

I am planning to use CD4 Cre mice crossed with Loxp mice. However, the laboratory from which I am trying to get the loxp sperm says they have "the product of the EMMA ko crossed with the FLPe to...

16 July 2024 7,475 1 View

What is the average energy consumption per gate operation with superconducting qubit?

Could you provide information on the average energy consumption per gate operation when using superconducting qubits, specifically focusing on the microwave power required to implement gates? I...

15 July 2024 954 0 View

What is the Scopus and Beall's dilemma?

I've found that some journals are both Scopus-indexed and listed on Beall's list as predatory or potentially predatory. Why does this discrepancy occur? Are there any more reliable platforms than...

12 July 2024 5,158 1 View

Absorption coefficient of methane?

Hello, Can anyone provide me with the absorption coefficient of methane gas at 7.7 um? Any reference?

06 August 2024 980 5 View

Is it possible to improve the reforming section of the Haber-Bosch process without using air separation units?

A typical reforming section in a large-scale Haber-Bosch process (Figure 1) comprises two reactors. A mixture of methane (CH4) and steam (H2O) is fed into a primary reformer to produce syngas via...

01 August 2024 7,051 5 View

Formula for calculation of biomethane formation from coal in enrichment culture inside serum bottle??

coal samples are enriched in 100ml serum bottles. Methane concentration was determined by GC in percentage. How it can be calculated in metercube /per gram of coal or any formula to specify the...

17 June 2024 4,787 0 View

What are the approximate quantities of Ni/Al₂O₃ and Cu/ZnO/Al₂O₃ catalysts required to produce 2095 tons of methanol per day?

A methanol production process combines tri-reforming of methane (TRM) with water electrolysis to utilize CO₂. The TRM reactor uses a Ni/Al₂O₃ catalyst, and the methanol synthesis reactor uses a...

10 June 2024 2,105 1 View

How Respirometric Sensor System (Velp Scientifica) eliminates methane from the system?

Dear all, today I started my Velp Respirosoft system for the first time and everything is new for me. I want to analyze pig manure for BMP. I am wondering is everything well set because I am a...

28 April 2024 7,609 1 View

What the mistake i am doing in this simulation?

Hello everyone. Recently i am start to work on Ansys fluent software to simulate a model. Model: A rectangular vessel having 100mm height, 30mm width and 1mm thickness having the mixture of...

25 April 2024 4,475 3 View

How I can remove nitrogen from misture of Biogas ( Composition includes Nitrogen 14 % , Methane 44 % , CO2 34% , H2O 2.1% , H2S 2.1% , O2 2.5%)?

How I can remove nitrogen from misture of Biogas ( Composition includes Nitrogen 14 % , Methane 44 % , CO2 34% , H2O 2.1% , H2S 2.1% , O2 2.5%)? I want to produce Hydrogen from biogas using steam...

22 March 2024 5,561 2 View

How to solve a warning in Fluidized bed reactor when using ASPEN PLUS?

Hello everyone, please I'm conducting catalyzed methane pyrolysis simulation using a fluidized bed reactor on Aspen plus. The warning shown reads Total bed mass elutriated. I have tried changing...

04 March 2024 5,366 1 View

How to measure volume of methane in fecal sludge?

How can I measure methane level in fecal sludge?

18 February 2024 4,786 1 View

Absorption spectrum of gaseous methane CH4 in UV range from 100 to 300 nm?

Dear Community, I'm looking for the information on absorption spectrum of gaseous methane CH4 in UV range from 100 to 300 nm, especially around 190 and 260 nm. If anyone have reliable...

23 January 2024 5,806 1 View