Solidworks design gray shadow view

01 January 1970 1 2K Report

When I draw parts on solidwork and extrude it then the part is not visible, only shadow view is there. How to fix this issue?

Md. Aminul Islam

Check graphics settings and update drivers.
Rebuild model (Ctrl + Q) to refresh display.
Switch display styles (e.g., "Shaded with Edges").
Ensure graphics card compatibility.
Toggle OpenGL settings if using it.
Reinstall SolidWorks if issue persists.
Contact SolidWorks support if needed.

Badges
Science topic

More Danishtah Quamar's questions See All

How to extract the features from the 2D thermal image data?

I have 2D thermal image data. How to extract the features such as standard deviation, mean, entropy, skewness, kurtosis, mean absolute deviation from thermal image data?

19 July 2022 6,292 4 View

How to obtain the grey level value at each pixel in the thermal image?

According to paper Evaluation of thermography image data for machine fault diagnosis How to obtain the grey level value at each pixel (figure 4) in the thermal image?

04 July 2022 4,853 4 View

How to perform 2D DWT over the thermal image?

I have thermal images captured from infrared thermal camera (FLIR; model:A655sc). I have to perform 2D DWT over the thermal image as the 2D DWT takes input as values.

01 January 1970 480 1 View

Scatter and fitting line plot in python

I am trying to plot the scatter and fitting line plot with below code sns.regplot(x='np.array(Y_test)',y='model.predict(X_test)') plt.show() Error is showing Must pass `data` if using named...

01 January 1970 5,378 3 View

Writing something over the python graph

I am trying to write R^2=0.8 over the python graph with help of code plt.text(0.3, 0.5, '$R^2$' ==0.8, fontsize = 22) 'False' come over the graph. When I write plt.text(0.3, 0.5, '$R^2$',...

01 January 1970 1,242 2 View

Does continues partial charging/discharging do any harm to the BESS performance and degradation?

For a grid connected BESS (lets say 100 MW/200 MWh system, LFP battery), if we charge the BESS in such a way that whenever we can access power from the solar that will charge the BESS. Hence it...

01 August 2024 9,903 7 View

How to Post-fix Mice pup's brains?

I need to Postfix mice brains. I slice the brains using microtome at 40 microns. These are Postnatal days 7, 11, 14, and 21. I am using half the brain for other analysis, so I need to fresh freeze...

31 July 2024 1,123 4 View

I am trying to find phonon, and when i run calculations, there is error ?

how to fix this error, from phq_readin : error # 1 DFPT with the Blochl correction is not implemented I am attaching my ph.in file.

23 July 2024 4,649 2 View

Why my gel electrophoresis have shadow bands? Please see the attached picture for the gel electrophoresis ?

Sometimes I see the shadow like bands and its not true band. I want to know that what's the reason for it. I am using 2% gel for running genotyping samples I have uploaded the gel picture in both...

19 July 2024 148 6 View

How to fix install package meta in R?

> library(meta) Error: package or namespace load failed for ‘meta’ in loadNamespace(i, c(lib.loc, .libPaths()), versionCheck = vI[[i]]): there is no package called ‘numDeriv’

18 July 2024 3,536 0 View

GIS (How can i fix when it appear in mines despite selecting WGSWGS 84 / UTM zone 38N?

I have a problem with geo-referencing a shape file. How can I fix it when it appears in mines despite selecting WGSWGS 84 / UTM zone 38N?

18 July 2024 2,696 1 View

Why in some wavelengths there are "overflows" in my Carbon dot UV-Vis Spectroscopy results(Emission segment)?

Hi everyone I have got this test in a fixed excitation and various emissions. In some wavelengths there are overflows which make the resulted analyze different from other carbon dots. Is it normal...

18 July 2024 4,244 2 View

Are my cells contaminated with mycoplasma?

I suspect my cells are contaminated with mycoplasma. I fixed the cells with 4% PFA and stained them with DAPI. Below is the image I obtained. I don't observe the typical small, rounded DAPI foci...

11 July 2024 7,786 3 View

How can I put small FWHM in CasaXPS?

I'm trying to fitting Cu Auger peak into various state (Cu0, Cu+, CuI etc..) In Cu0, one of the peak's FWHM is 0.84 but when I try to enter smaller value than 0.89, "input error" is occured. How...

02 July 2024 4,932 3 View

Any Green Solvents to dissolve PET near room temperature?

I need a PET + Solvent mixture to feed it to a fixed bed reactor for steam reforming.

30 June 2024 2,122 2 View