Where I can find data & projects for fixed offshore Oscillating Water Column device?
Do you have related codes or suggestions?
Hi Ionut
this might be a good start https://cordis.europa.eu/project/rcn/88274/reporting/en
I am trying to configure the instrument in Profex but I can't get a chi-squared value below 9.65 for LaB6. This is the configuration of the equipment, which is a Bruker D8 Advance with a Linxeye...
14 July 2024 4,767 1 View
En México existe una institución externa a la universidades que evalua a los candidatos al egreso, es decir, a los alumnos que se van a graduar de licenciatura. Es una prueba a gran escala, que...
08 May 2024 6,666 1 View
Where to find a simulation for propellers in ANSYS CFX or Fluent? See what I already done below:
01 May 2024 7,255 3 View
ANSYS FLUENT - I need to generate variable wind speeds with rapid changes in velocity. How to add winds in ANSYS to simulate a hurricane? Or how to get a variable wind speed and direction input?
01 May 2024 4,236 1 View
I need a tutorial for a simulation for water entraped in ports with various depth and various currents at the port entry. Where I can find a similar simulation?
01 May 2024 3,523 2 View
Hi everyone, I'm looking for some open source software for molecular docking with constraints based on distances or interactions. Any recommendations would be greatly appreciated. Thanks!
16 April 2024 1,238 2 View
Most of the researchers use to teach at university. In some careers, professionals who exert their profession without doing research share teaching spaces. When I was a chemistry student, 100% of...
04 April 2024 4,483 6 View
Please fill this survey. https://docs.google.com/forms/d/1A3h0-qBLkp9YUY40zF3-DuNYXD06ENfrXnJhS9lq0iE/edit
24 February 2024 7,917 1 View
We are trying to find the differences in the results these methods provide.
08 February 2024 4,825 3 View
So I have tried to PCR a fragment for my assemblies. (not so successful as of late I might add) although I have done them almost 100 times. I have changed polymerases (not related to my...
11 August 2023 7,917 0 View
For a grid connected BESS (lets say 100 MW/200 MWh system, LFP battery), if we charge the BESS in such a way that whenever we can access power from the solar that will charge the BESS. Hence it...
01 August 2024 9,903 7 View
I need to Postfix mice brains. I slice the brains using microtome at 40 microns. These are Postnatal days 7, 11, 14, and 21. I am using half the brain for other analysis, so I need to fresh freeze...
31 July 2024 1,123 4 View
I have environmental data from an offshore to onshore transect. I would ideally like for the figure to have depth (yaxis), longitude (xaxis), environmental parameter (zaxis), and bathymetry. I...
30 July 2024 535 1 View
how to fix this error, from phq_readin : error # 1 DFPT with the Blochl correction is not implemented I am attaching my ph.in file.
23 July 2024 4,649 2 View
> library(meta) Error: package or namespace load failed for ‘meta’ in loadNamespace(i, c(lib.loc, .libPaths()), versionCheck = vI[[i]]): there is no package called ‘numDeriv’
18 July 2024 3,536 0 View
I have a problem with geo-referencing a shape file. How can I fix it when it appears in mines despite selecting WGSWGS 84 / UTM zone 38N?
18 July 2024 2,696 1 View
Hi everyone I have got this test in a fixed excitation and various emissions. In some wavelengths there are overflows which make the resulted analyze different from other carbon dots. Is it normal...
18 July 2024 4,244 2 View
I suspect my cells are contaminated with mycoplasma. I fixed the cells with 4% PFA and stained them with DAPI. Below is the image I obtained. I don't observe the typical small, rounded DAPI foci...
11 July 2024 7,786 3 View
the hydrodynamic For the past 20 years, from 2003 to 2023, the present year, 2024 and future year 2040.
10 July 2024 6,044 0 View
I'm trying to fitting Cu Auger peak into various state (Cu0, Cu+, CuI etc..) In Cu0, one of the peak's FWHM is 0.84 but when I try to enter smaller value than 0.89, "input error" is occured. How...
02 July 2024 4,932 3 View