Hello, Anyone here with a recommended experimental research paper that conducts shake table testing of reinforced concrete. I am validating my results and in order to do that I need an actual building and simulate it in ETABS to verify that the ETABS are capable to depicts the displacement response through time when conducting Non-Linear Time History Analysis.
Dear Jan Lhester Valdez Navasca;
You can verify with following reference:
1- Pinto A., Verzeletti G., Molina F.J., Varum H., Pinho R., Coelho E. [1999]. “Pseudo-Dynamic Tests on Non-Seismic Resisting RC Frames (Bare and Selective Retrofit Frames)”. EUR Report, Joint Research Centre, Ispra, Italy.
2- Carvalho E.C., Coelho E., Campos-Costa A. [1999] “Preparation of the Full-Scale Tests on Reinforced Concrete Frames. Characteristics of the Test Specimens, Materials and Testing Conditions”, ICONS Report, Innovative Seismic Design Concepts for New and Existing Structures, European TMR Network, LNEC.
3- Pinho, R. and Elnashai, A.S. [2000]. “Dynamic collapse testing of a full-scale four storey RC frame”, ISET Journal of Earthquake Technology, Paper No. 406; 37(4), pp. 143-164.
4- Varum, H. [2003]. “Seismic Assessment, Strengthening and Repair of Existing Buildings”, PhD Thesis, Department of Civil Engineering, University of Aveiro
Warm regards,
- Badges
- Science topic
- Similar topics
- Biological Science
- Bioecology
- Systems Ecology
- Landscape Ecology
- Connectivity