Reference books to learn in depth about Creep in alloys and its various testing methods?

More Roshan Sebastian's questions See All

In COMSOL simulation of SLM- AM process, how do we add the powders in cubic packing over the build substrate?

Am trying to simulate the SLM process for a single layer of Alloy 718. I need to add 718 powders of 40 microns thick over the substrate plate and simulate the printing. How could one add up the...

09 October 2019 2,099 10 View

What would be the initial and the ending melt pool dimensions when the laser beam shines on the powder material in the SLM process?

Melt Pool dynamics determine the features of the part produced in the SLM. The question is about the initial and ending melt pool shapes during the 3D printing and how much time would it take to...

06 July 2019 6,143 3 View

In SLM process, what are the reasons for part to protrude out from the surface and how to avoid it?

During the SLM printing process, it was observed that the recoater blade constantly touch the parts and as a result less amount of powders were seen to deposit over the printed part. Why would...

04 May 2019 1,423 4 View

Is it true that the residual stress in EBM process are smaller compared to SLM process due to long time exposure to high temperatures in the former?

I want to know the exact reasons for residual stress formation and the standard adopted practices to avoid them during 3D printing.

11 December 2018 1,422 10 View

What does micro-pores present on the microstructure of additive manufactured alloys signify?

In the analysis of the etched microstructure of the additive manufactured nickel superalloy, micro pores in the nano-meter dimensions were found in the matrix and also on the dendrite structures....

04 May 2018 1,847 7 View

Could anyone suggest books to read about Automobile Crankshafts and their failure mechanisms?

Wants to learn about the basics of Crankshafts and the different failure mechanisms.

01 February 2018 9,478 2 View

Is differential etching for SLM processes associated with the thermal stress or any high-energy associated during the process?

The sample showed processed by SLM shows differential etching with respect to surface and the bulk. The cross-sectional samples after the deposition are etched. What could be the reasons for the same?

01 February 2018 3,806 5 View

How is the heat extracted as the melt pool Solidifies in the Laser Beam Melting Process ?

Consider an hemispherical molten pool, which has a higher temperature at the top surface and a lower temperature at the bottom surface. I am confused about the direction of heat extraction and the...

31 December 2017 7,129 3 View

Why does FCC structured materials Hardness indent does not show the typical depression zone around it, even though the hardness is over 400 HV ?

As per literature, FCC materials show larger depressions around it after hardness indentation. But an additively manufactured sample having hardness around 400 HV and is assumed to be FCC, does...

31 December 2017 5,603 7 View

XRD data for a sample, which is a mix of two dissimilar alloys and its Interface. How to analyse the data and separate out the constituent phases?

The data for a bulk sample is obtained in Powder mode. How could one separate out the constituents using JCPDS search?

08 September 2017 5,586 2 View

Could you recommend any books about Number Theory?

Beginner level books. High level books. Analytical Number Theory. Algebraic Number Theory. Combinatorical Number Theory. Books about partitions. Books about primes.

03 March 2021 7,174 5 View

Why should we choose deep learning to machine learning? Why is CNN better for image classification? Can I get Typical Answer?

What Characteristics makes CNN work better?

03 March 2021 1,458 4 View

What are some of the research gaps in machine learning and artificial intelligence in africa?

i would to know some of the research gaps in the artificial intelligence field in most african countries.

03 March 2021 6,145 3 View

What kind of intervention will be relevant to increase motivation among young sport trainees?

Any suggestion on what book to read is also welcome.

03 March 2021 1,646 4 View

Anyone plz suggest relevant topic for research in image processing+Deep learning.?

I have selected brain tumor images ...but now found that already lots of research done n this topic.

03 March 2021 5,774 3 View

How to increase a model accuracy ?

dear community, my model is based feature extraction from non stationary signals using discrete Wavelet Transform and then using statistical features then machine learning classifiers in order to...

03 March 2021 6,994 5 View

How the parameters (such as Mw, Chemical bonds, polymer bland and so on) affect the mechanic property of polymer (such as storage, loss modulus) ?

Anyone can recommend any books on such topics? Thanks in advance.

02 March 2021 8,457 2 View

Sample dilution for quantitative analysis using ELISA?

If the detection range is in ng/ml but the reference range is in ug/ml for a molecule or protein in serum or plasma .how to dilute and what is the initial volume to be taken for quantitative analysis

02 March 2021 7,670 3 View

Which is the most efficient etching solution for nickel based alloys?

Which solution reveals the microstructure and features of nickel-based alloys?

02 March 2021 2,221 3 View

I am interested in medicinal chemistry field, which books are highly recommended to learn from?

I am at the beginner level in drug design and drug discovery, and I am interested to learn more about this field. Which books are highly recommended to start from and gives me all essential...

02 March 2021 8,437 2 View

Mikhail Slobodyan

Fundamentals of Creep in Metals and Alloys https://b-ok.cc/book/2569010/d5a9f3

The physics of creep : creep and creep-resistant alloys https://b-ok.cc/book/3580286/795b65

Creep of Crystals: High-Temperature Deformation Processes in Metals, Ceramics and Minerals https://b-ok.cc/book/686705/4c5a57

Plasticity and Creep of Metals https://b-ok.cc/book/1225364/dbf45e

Creep and Long-Term Strength of Metals https://b-ok.cc/book/3423052/5f54b0

Roshan Sebastian

Mikhail Slobodyan : Could you recommend books related to the creep strength and testing of Inconel superalloy 718? It would be great if it contains some references to the dependency of creep strength to the manufacturing process, especially SLM.

Thanks in advance!!