Noise exposure of lawn mower operators?

06 July 2020 0 8K Report

How to determine the noise exposure of lawn mower operators.

Due to the fact that in the noise generated by this device, variables such as device power(w), device fuel, engine speed(rpm), lawn mode, grass density, ground slope, distance from reflection barriers are effective. Thanks.

Badges
Science topic

Similar topics
Correction

More Farshad Nadri's questions See All

Hello friends In simulating the drug with the liposome, which side of the liposome membrane is the drug placed on? The top leaf or the other?

Several times by placing a restriction on the upper part of the membrane with the aim of preventing the drug from being added from this side, we tried to keep the drug at the top of the leaf, but...

29 June 2024 9,688 1 View

Hello friends I am optimizing a structure from the point of view of energy with NAMD in Linux environment?

But I am facing the following error while continuing to work. I would be grateful if anyone has any information about this to share with me. FATAL ERROR: BAD vdW FORMAT IN CHARM PARAMETER FILE...

05 December 2023 7,905 2 View

Why I encounter errors for TS(QST2) calculation using g09 ?

While computing the TS with semi empirical method, for an imaginary reaction similar to Sn2 I encountered multiple kind of errors. ( also preoptimized the two gjf file before calculation ). I'm...

06 August 2023 1,949 1 View

What is the effect of uncernity in discovery studio while creating 3D-QSAR pharmacophore model ?

hi, i am creating a 3D-QSAR pharmocophore model using Discovery Studio 4.1 , and i dont understand what is uncernity and how should i know which uncernity is better for my ligand ?shall i set a...

03 March 2023 6,587 3 View

Why lift coefficient isn't matching with experimental data?

hi I am working on the validation of the case which is "simulation of the flow around a circular cylinder at Re=3900 by using XFLOW software " .my boundary conditions is shown in the attached...

05 April 2021 1,130 7 View

Can CO adsorption capacity on Cu(I) modified surfaces increase with temperature increase?

Throughout the literature for adsorption of carbon monoxide on Cu(I) modified surfaces, the adsorption capacity decreases with an increase in temperature. The material I am using is a mixture of...

22 October 2020 8,052 5 View

How to calculate forces acting on Large industrial centrifugal fan blade to be considered in the Finite Element modelling?

hi friends. i m working on large industrial centrifugal fan to investigate causes of failure. How to calculate forces acting on Large industrial centrifugal fan blade to be considered in the...

12 August 2020 2,957 9 View

Why dose force become constant in two way FSI?

Dear friends I'm working on the validation of an FIV case, which for making phase difference between force and displacement, I used an initial velocity in the structural, but after several...

10 August 2020 9,303 4 View

What does it mean when a paper review status changed from "Under Review" to "Awaiting Recommendation" in Manuscript central?

What does it mean?

03 August 2020 948 2 View

How can I decrease particle size of crystalline Boron powder?

I have some Boron powder in the lab with a 4-micron median particle size. I want to reduce the particle size to below 2-micron. I tried a planetary mill with an Ar atmosphere and WC balls. I could...

10 May 2020 3,536 7 View

Why Do TDS and EC Increase with Larger Wastewater Volumes, While BOD and COD Decrease?

I have carried out MFC experiments on three different volumes, 50, 500 and 1000 mL of wastewater. Results after MFC treatment shows that TDS and EC are more in larger volumes of water i.e. TDS and...

09 August 2024 9,621 0 View

Are air moisture harvesting technologies effective in combating desertification?

Air moisture harvesting Air water collection devices

06 August 2024 5,473 2 View

Best mask design for metal deposition aiming build a Perovskite solar cell device?

What types of mask designs for metal deposition, to be used in a PVD system, are best suited for perovskite-based solar cells?

31 July 2024 4,835 3 View

What is the relationship between the threshold voltage and the device's noise performance, particularly in terms of flicker noise and thermal noise?

The threshold voltage (Vth) of a MOS device plays a crucial role for its operation. At the same time, noise is an intrinsic factor. So how noise (flicker or thermal) change with the change in...

29 July 2024 3,246 0 View

What is the best method to detect the chemical composition of pollen ?

I have multiple small samples of grass pollen with anthers. I want to find a method to identify concentrations of proteins, lipids, and other various elements for these samples. any suggestions?

28 July 2024 5,331 1 View

Charge transfer characteristics of inverted perovskite leds?

When testing devices based on ITO/ZnO/CsPbBr3/TFB/MoO3/Ag structures, I found that the current density of the device always increases sharply to 1000mA/cm2 at about 3V bias, and the device does...

16 July 2024 4,291 0 View

Why flow rate of MFC for pure NH3 gas decreases with time?

We have been using MFC to control the flow rate of pure ammonia gas. The MFC is placed in an oven at 50 deg. C to avoid blockage due to NH3. However, after a few days of usage, the MFC is unable...

11 July 2024 5,796 1 View

What do you think are the key challenges that need to be addressed in the future development and application of these three devices?

Continuous glucose monitors (CGMs) help patients and doctors make more timely management decisions by monitoring blood glucose levels in real time. An insulin pump provides continuous insulin...

07 July 2024 7,742 0 View

What is the consumption of hydrogen in 60 volt and 70% efficiency in fuel cell ?

Hydrogen fuel cell

03 July 2024 7,723 0 View

Conjugate Pad absorption suddenly changed?

Hello, I am doing some testing on lateral flow devices/materials and have run into a slight issue where I do not understand what the cause may be, but I have some ideas. General Experimental...

01 July 2024 7,960 3 View