Can Magnetic levitation be achieved in room temperature?
If yes how?
thank you Arpit
What is the best method to visualize the Center of gravity in a CFD Analysis using Fluent Solver and Ensight Postprocessor?
31 December 2015 10,085 3 View
Transportation of iron ore (mixture of both fines & lumps) from its mine to sea port using rail wagons which results in moisture content formation in the iron ore and leads to following...
31 December 2014 7,439 3 View
Test Condition: M=0.8395; Re= 11.72e6; AOA=3.06; Location y/b= 0.20 ::Please refer the following references and attached image as...
08 September 2014 1,181 5 View
For example: percentage of error when Actual Value is 0 and Recorded Value is .1
02 March 2014 641 10 View
Many people say the following: :"With a motor with an output of 50 HP, to convert the HP output into Watts is: 50 HP x 746 Watts/ HP = 37,300 Watts or converting to kiloWatts (kW) = 37.3 kW A...
07 August 2013 3,709 8 View
Hello everyone, I recently submitted an article to Geotechnical Engineering (Proceedings of the ICE), and the current status has been listed as "EiC Pre-assessment: Ready" for the past 20 days. I...
10 August 2024 6,493 1 View
What should a Mechanical Engineering PhD scholar focus on during their PhD to enhance their chances of securing a postdoctoral position?
29 July 2024 7,714 4 View
In some data sources it has been grouped in Q1 and some shows it is Q2.
29 July 2024 4,227 2 View
Dear Research Community I would like to invite Elctrical Engineering specialists to solve problems related to Ternary Algebra or tripple sets I have an algorithm that places in relation three...
28 July 2024 5,771 2 View
Contemporary scores or innovations in scientific approaches. Hybrid methodologies, emerging themes and cross-cutting issues?
27 July 2024 648 3 View
Accredited laboratory of JV "Uz-Kor Gas Chemical" LLC (Uzbekistan) is looking for providers to conduct interlaboratory comparison tests on gas chromatographic analysis of hydrocarbons (component...
25 July 2024 8,108 0 View
The aim of the research here is to prevent the propagation of the crack in the fabricated elastic medium with useful applications.
25 July 2024 9,976 3 View
// interested in the difference between floating events and short circuits.
22 July 2024 6,565 0 View
I am looking to purchase a photography kit for onsite metallurgical investigations, such as capturing photos of worn areas, hot tears, cold tears etc. Could anyone suggest me a good...
22 July 2024 3,490 2 View
Chemical Engineering /Food Engineering
20 July 2024 4,152 4 View