Joining of Low carbon steel and martensitic steel is possible by Arc welding ?
Yes, but get a welding technologist, metallurgist or welding engineer to design your weld.
key things
welding process,
filler metal
pre heat and post heat
also need to know what strength and ductility among many properties is needed
Yes, please follow the recommendations of this paper:
https://app.aws.org/wj/supplement/Bere08-01.pdf
The threshold voltage (Vth) of a MOS device plays a crucial role for its operation. At the same time, noise is an intrinsic factor. So how noise (flicker or thermal) change with the change in...
29 July 2024 3,246 0 View
I am trying to drop cast 2D Materials on Glassy Carbon Electrode for Cyclic voltametry and EIS purpose. What would be best binders to use?
23 July 2024 5,776 2 View
If you don't understand my question let me know
21 July 2024 563 1 View
I am working on scale development in behavioral finance by undertaking a mixed-method approach using the exploratory sequential design. The phenomenon has diverse meanings in existing literature...
20 July 2024 9,153 11 View
I need to convert Available phosphorus into total phosphorus
18 July 2024 6,799 3 View
Bioinformatics tools like peptide cutter
15 July 2024 6,453 1 View
The burden of obesity is enormous. The greater challenge lies in accurately diagnosing obesity at the right time, reflecting the true increase in visceral fat. BMI may not accurately represent...
14 July 2024 8,771 4 View
How does high humidity affect the growth and development of crops?
10 July 2024 7,258 20 View
In what ways does high humidity impact the pollination process in agricultural plants?
10 July 2024 7,513 13 View
I came across the Green Building and Sustainable Architecture collection under Nature Scientific Reports some weeks ago. https://www.nature.com/collections/gajghaebce The special issue/collection...
10 July 2024 5,533 1 View
Hello everyone, I recently submitted an article to Geotechnical Engineering (Proceedings of the ICE), and the current status has been listed as "EiC Pre-assessment: Ready" for the past 20 days. I...
10 August 2024 6,493 1 View
What should a Mechanical Engineering PhD scholar focus on during their PhD to enhance their chances of securing a postdoctoral position?
29 July 2024 7,714 4 View
In some data sources it has been grouped in Q1 and some shows it is Q2.
29 July 2024 4,227 2 View
Dear Research Community I would like to invite Elctrical Engineering specialists to solve problems related to Ternary Algebra or tripple sets I have an algorithm that places in relation three...
28 July 2024 5,771 2 View
Contemporary scores or innovations in scientific approaches. Hybrid methodologies, emerging themes and cross-cutting issues?
27 July 2024 648 3 View
There are three operating parameters - the laser power, the diameter of the focus spot and the scanning speed. It is necessary to obtain a seam of a given depth without pores. What parameter...
27 July 2024 7,168 2 View
// interested in the difference between floating events and short circuits.
22 July 2024 6,565 0 View
I am looking to purchase a photography kit for onsite metallurgical investigations, such as capturing photos of worn areas, hot tears, cold tears etc. Could anyone suggest me a good...
22 July 2024 3,490 2 View
Chemical Engineering /Food Engineering
20 July 2024 4,152 4 View
I make polycrystalline diamond with tape casting followed by HPHT sintering. When i sintered the samples up till May, the sintering was good. When i sintered the samples in June and July at the...
16 July 2024 3,212 5 View