CoxNiyFeO
A new way to measure scientific reputation.
I have tried to saturate ferritic steel with hydrogen using the electrolytic method and H2SO4. However, the effect was very poor even after 3 days of "saturation". Can anybody help in choosing a...
24 July 2024 4,393 2 View
I am trying to drop cast 2D Materials on Glassy Carbon Electrode for Cyclic voltametry and EIS purpose. What would be best binders to use?
23 July 2024 5,776 2 View
We are trying to coat some cathode materials on Al-foil ( ex - LiFePO4 , S@CNT, etc). When we coated the Al foil with the cathode (ex - S@CNT) material , the cycling result was annoying. But the...
09 July 2024 5,123 4 View
Will these measurement results change, for example, 1 month after the first measurement (e.g. CV, EIS) of the electrode or supercapacitor device? If it changes, how will it change? Is there an...
03 July 2024 3,644 2 View
I am simulating 1 cell of PEM with an area of 50 cm². The mesh has an orthogonality of 0.2 for the channels and bipoar plates (polyhedra) and a quality of 1 for the active zones (hexagonal). The...
26 June 2024 2,358 0 View
I am doing research in the United Sates America. So, I will pay in US dollar. Could you please tell me how can i get Zirfon membrane? Thank you.
24 June 2024 7,667 0 View
I am making Li half cells using NMC as cathode. The OCV is around 3 V but it self discharges and during charging the voltage increases to 3.5 V and then drops to 3.3-3.4 V and stays there. I have...
23 June 2024 842 3 View
In solid ceramic electrolyte what is the Physical significant of area under the curve in dielectric loss tangent studies ??
23 June 2024 4,354 1 View
For additional information, I am a master's student looking for a LCA software to do my thesis. So a less expensive one is my first priority, but if it is not able to help me with a clarity...
18 June 2024 8,376 3 View
I want to know the exact mechanism behind the motion of ions inside the polymer electrolytes.
13 June 2024 3,489 0 View
