Is there any software or data set available to provide heat demand of residential buildings?

Amir Mohammad Jodeiri Khoshbaf @Amir_Mohammad_Jodeiri_Khoshbaf

07 July 2018 1 2K Report

In order to estimate heat demand pattern and accordingly load duration curve of a residential building with determined area in a specific place like Sydney, I need to access the load/demand data on hourly, daily and monthly basis. I would appreciate any helpful suggestion such as software or database.

Md. Parvez Islam

https://eta.lbl.gov/resources/software

Badges
Science topic

Similar topics
Heat

More Amir Mohammad Jodeiri Khoshbaf's questions See All

How is it possible to access the solar flux density data worldwide?

For a research project, the solar flux density data for a specific place in Australia is required. Finding solar radiation figures based on its unit (KWh/m2) per year or month is doable through...

06 July 2018 9,920 7 View

What points and criteria should be taken into consideration while preparing a review paper?

I intend to write a review article and publish it accordingly. I would like to know general ideas about the steps from the scratch and Dos and Don'ts. Thank you.

06 July 2018 7,980 1 View

Conference payment procedure

I am going to submit the abstract of my research project for a conference. What is the general procedure of the payment? Am I obliged to pay for the submission of my abstract even if it is...

01 January 1970 1,085 7 View

What are the countries most affected by extreme rainfall as a result of climate change?

Increased heat, drought and insect outbreaks, all associated to climate change, have increased wildfires. Decreasing water supplies, declined agricultural yields, health impacts in cities owing to...

01 March 2021 7,168 9 View

What is recommended for solid domain in ANSYS FLUENT?

Should I mesh the solid domain ? or should I use wall thickness? or Shell conduction? for Heat Transfer between two fluids of a Heat Exchanger. what is recommended?

01 March 2021 9,785 3 View

Heat exchanger with liquid Nitrogen as coolant?

I want to cool Natural Gas from 195 Kelvin to 138 Klevin in a heat exchanger by using liquid nitrogen as the coolant medium. When entering the heat exchanger, the liquid nitrogen will have a...

01 March 2021 6,450 5 View

How to size battery banks?

I am designing a small grid connected solar PV power-plant. As the battery's capacity is specified in Ah and demand in kWh. What is the best way to size the battery bank? I have battery price in...

28 February 2021 1,638 3 View

How can i resolve the "final solutuin is not converged" error in Comsol for my heat transfer simulation??

I have been trying to simulate heat transfer problem in Comsol 5.5 for long time but it always throw an error stating: "Failed to find a solution. Maximum number of Newton iterations...

28 February 2021 8,626 3 View

Exit velocity of natural gas from pressurized tank?

Hi Guys. I'm a mechanical engineer and have a bit trouble, would be very glad if you could help me with my questions. I have a pressurized tank which contains Natural Gas at 200 Bar and 293...

26 February 2021 6,253 3 View

Anyone that can help with Maxquant TMT16plex which is missing?

Hi I am very new to proteomics analysis. I have got raw files from core facility running thermofisher TMT 16plex 4 hours. I cannot find on maxquant the option TMT16Plex there is only up to 11...

25 February 2021 1,675 3 View

How to properly calculate the fluid solid heat transfer between polypropylene matrix and glass fiber in a porous medium?

I'm building a cfx model of thermoplastic pultrusion process on ansys and i have a doubt on how is the proper way to set this parameter in a porous medium

24 February 2021 1,915 1 View

How to properly calculate Interfacial area density in a porous domain?which are possible value for glass fiber?

I'm doing a cfx simulation of a multiphase flow in pultrusion and i set the Interfacial Area density in the heat exchange of a porous medium in this way IAD=Total fiber lateral surface of fiber...

23 February 2021 6,043 1 View

Model Volume fraction and magnetic field applications of nanofluids in ANSYS?

Hi I am working recently on a project where I have to study how the thermal properties or heat transfer enhancement of nanofluids as the volume fraction changes, or if a magnetic field is applied...

22 February 2021 961 2 View