I am working on the polymerization of hetero atom contained monomer (in aqeous phase) in presence of tetra-n-octyl ammonium bromide. Will this cross over phenomena have relevance during polymerization structure directing property?
I want to develop the figure like attached figure. How can I get, peak period and significant wave height at any given location.
13 July 2024 886 2 View
We are fabricating a tandem structure where a ~50 nm thick WO3 film is deposited between two metal films using DC sputtering. We use a mixture of Ar and O2 gases at different flow rates while...
01 July 2024 2,685 2 View
How to plot like attached figure in matlab?..
25 June 2024 7,220 4 View
Even after using the formula i am not getting the answer can anyone help me with one example .
28 May 2024 4,503 1 View
We have been getting this black dots in our cell culture. But it is not affecting pH of media (no color change observed) until 4 or 5 days. Cells are attaining morphology within 24hrs but once the...
12 May 2024 9,284 4 View
Increasing nozzles height of drone spryaing system increases droplet size. What could be the reason behind it? ?
03 March 2024 4,127 0 View
Which is the more accurate method to calculate LUMO value for a D-A system? Either it from absorption edge or from CV measurement on reduction side?
15 February 2024 5,635 1 View
Hello everyone, I recently encountered a noise problem in my patch clamp experiments. I happened to observe a small current and a noise when the electrode holder was in the open circuit. The...
28 January 2024 927 3 View
Hello! I have been culturing GM11994- B lymphocyte cells from Coriell Institute. They are suspension cells and like to grow in colonies. However, after genetic modifications, I sorted single cells...
09 January 2024 7,779 0 View
Papers that compute natural frequencies of cylinders made of composite materials.
29 October 2023 6,669 0 View
How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...
10 August 2024 940 3 View
I did PR spin coating on trench structure. I used AZ P4620 PR and the thickness or PR is around 11um. The substrate is Si. And my trench structure depth is 141um(negative way). Even though I...
08 August 2024 2,297 0 View
We intend to study the interaction between peptides and polymer (like PP, PE and PS) through MD simulations using Martini force fields ( Martini 2 for PP and Martini 3 for PE, PS). We have...
08 August 2024 4,841 0 View
If we map as a continuous motion an ionising electron (beginning its journey at n=1) in an H atom, a specific hyperbolic spiral appears (see animation). When we solve this spiral formula, we find...
07 August 2024 5,342 2 View
I have face this problem anyone help me how to solve this issue ?which is below Fatal error: There are inconsistent shifts over periodic boundaries in a molecule type consisting of 78 atoms. The...
07 August 2024 2,597 1 View
Hi all, my experimental XPS results shown that my C3N5 sample consists of N-H bond, hence in this case I should incorporate the N-H bond into my DFT modelling. However, I do notice several papers...
07 August 2024 8,414 2 View
is there any other way to heat a polymer evenly other than oil bath if so what are those and how to use it
06 August 2024 946 1 View
If from a geometric perspective the non-halogens, non-noble gases have more empty spots in their valence shell, and the filling/exiting of any of the empty spots in the shell constitutes a...
03 August 2024 4,787 2 View
If you think of electrons with spin as bar magnets, you know bar magnets of opposite polarity as long as they're not occupying the same spatial location don't cancel out each other's magnetic...
03 August 2024 3,927 2 View
I am currently using CASTEP version 2020. When I want to run optical properties calculations with spin-orbit coupling(SOC), I encounter the following error in a pop-up window before the job gets...
02 August 2024 2,890 0 View