Errors
Error 60 : At node 'Node_671' the water level is more than 10.00 m above the ground level. Perhaps due to too long time stepsInfo: The entry FLOODLIMIT in the "dhiapp.INI" file was set to: 10 [m]. The default value is: 10 [m].
Error 90 : Calculations terminated at the time 2018-08-11 12:01:10 [ 0 : 00:01:10 ]Simulation start date :2018-08-11 12:00:00
Simulation end date :2018-08-11 18:00:00
Warnings
Warning 710 : The diameter for the manhole in node 'YS031139' is 5.00 m. This is smaller than the diameter 5.50 m, of the connected link 12444.The diameter for the manhole in node 'YS031133' is 5.00 m. This is smaller than the diameter 5.50 m, of the connected link 12444.The diameter for the manhole in node 'YS031139' is 5.00 m. This is smaller than the diameter 5.50 m, of the connected link 12445.The diameter for the manhole in node 'YS031141' is 5.00 m. This is smaller than the diameter 5.50 m, of the connected link 12447.The diameter for the manhole in node 'YS031139' is 5.00 m. This is smaller than the diameter 5.50 m, of the connected link 12447.The diameter for the manhole in node 'YS031143' is 5.00 m. This is smaller than the diameter 5.50 m, of the connected link 12449.The diameter for the manhole in node 'YS031141' is 5.00 m. This is smaller than the diameter 5.50 m, of the connected link 12449.The diameter for the manhole in node 'YS031145' is 5.00 m. This is smaller than the diameter 5.50 m, of the connected link 12451.The diameter for the manhole in node 'YS031143' is 5.00 m. This is smaller than the diameter 5.50 m, of the connected link 12451.The diameter for the manhole in node 'YS031147' is 5.00 m. This is smaller than the diameter 5.50 m, of the connected link 12453.The diameter for the manhole in node 'YS031145' is 5.00 m. This is smaller than the diameter 5.50 m, of the connected link 12453.The diameter for the manhole in node 'YS031149' is 5.00 m. This is smaller than the diameter 5.50 m, of the connected link 12455.The diameter for the manhole in node 'YS031147' is 5.00 m. This is
Dear Sigh,
You can try to use limited Max.Inflow in that Node_671. It helps your model reduce the water level which is less 10 m above ground level.
Nguyen
- Badges
- Science topic
- Similar topics
- Filing