Difference between Volumetric locking and hour glass effect
Rubber seals , Rubber Liners especially
06 July 2015 9,184 0 View
I am trying to solve a 3-D hyperelasticity problem using ANSYS 14 and using the element SOLID 185. The solution is not at all converging. Can anybody please help me out on this.
04 May 2015 5,645 1 View
I am trying to model an FGM plate in ANSYS.
02 March 2014 5,548 5 View
I need a very narrow glass capillary for my research. How can I make a glass capillary with an inner diameter of around 200 to 500 nanometers?
08 August 2024 8,915 0 View
I will polymerise Aniline on ITO glass WE, using 1M of H2SO4 and a potentiostat. However, I am not sure if I have to do the electrochemical polymerisation inside a hood. Is it necessary? Is the...
10 July 2024 2,937 3 View
Hi all, I am looking glass cilinders that have an open flat bottom and top. Preferably with the inner diameter in the range of 2 cm. It's similar to the ones found on multi-electrode arrays for...
06 July 2024 5,846 1 View
If we want to introduce a material similar to polymethyl methacrylate "with the characteristics mentioned in the next paragraph" that can be added to a precursor and create a composite, which...
03 July 2024 2,371 1 View
I use PDMS to build a microfluidic system, but it is not hardening at all, although I use TEOS as a cross-linker and also ATPES in a ratio of 1:10, and it's been 3 days at 80 degrees of 3 ml cast...
01 July 2024 604 3 View
Is direct contact of polllutant and catalyst needed? or indirect contact just like photocatalyst wrapped inside glass can also create hydroxyl radicals and elimnate pollutants near to its wrapped...
23 June 2024 3,249 5 View
who retails few mm diameter polished circular glass plates ? thickness 0.1 to 1 mm diameter 1 to 3 mm ordinary or fused silica glass polished on both sides and the edge
16 June 2024 763 1 View
What share is made of steel? Plastics and glass? Aluminum? Iron?
15 June 2024 7,246 2 View
I used a two-phase extraction protocol (essentially the Bligh-Dyer or Folch protocol) to fractionate C. elegans into aqueous metabolites, lipids, and protein. These worms have been fed bacteria...
11 June 2024 8,991 1 View
We are currently trying to replace acetate when dehyrdating ("drying") cryo sections on glass slides with a less harmful alternative. For many chemical purposes ethyle lactate is recommended - has...
10 June 2024 5,213 3 View
