Erbium as a material in MEEP?

How to use erbium as a material in MEEP??

04 May 2017 5,814 0 View

What is Flat Lens Antenna?

28 February 2021 5,433 3 View

Absorption behaviour of anechoic model?

I have modelled a unit-cell of an anechoic structure using ANSYS. The layer is silicone and has been assigned as an acoustics physics region, with an air cavity inside (the air has been modelled...

18 February 2021 4,119 1 View

Is there a way to use waveguide ports for circular antenna design in CST?

Hi, whenever i use circular array i get this error "Waveguide ports must be aligned with Cartesian coordinate planes for the transient solver" Does anyone use circular array with waveguide ports?...

09 February 2021 3,609 8 View

Design parameters of L1 frequency Helix antenna?

Could I please get the guidance on Helix antenna operated from 1.5 - 1.8 GHz. I am designing in hfss and not able to cover 1.5 GHz. Could I get papers or suggestions on numbers I use to cover this...

02 February 2021 622 7 View

Need a research paper for multi speaker and single microphone acoustic echo cancellation?

Hi, I am working on a problem that involves multiple smartphones/tablets. All devices are playing the same sound with synchronization difference up to +- 5ms. Now, there is an echo issue and I...

02 February 2021 5,929 3 View

How can I quantify background noise in a bioacoustic file?

I am using Audacity to analyse the presence of birds and frogs recorded with a SM4 recorder (Wildlife Acoustic). Background noise (rainfall, wind) is an important variable to consider that can...

28 January 2021 2,989 3 View

VSWR is shooting to 2.1 or even 2.3 in UHF dipole antenna, why?

So, I have a design, two dipoles working at UHF and VHF. We fed using a diplexer. I am having difficulties with the testing using network analyzer. VHF passes but UHF, specially at 400 MHZ, the...

26 January 2021 8,743 8 View

Can I simulate Ferrite in HFSS?

I have a design with 2 dipoles working at different frequencies joined in one system and separated by Ferrite. I think, Ferrite was used to minimize the interference between 2 antennas as much as...

25 January 2021 5,918 3 View

Testing of Antennas?

So, I came across, where antennas are being tested in a building ( a plant), where all sorts of big equipment are around and of course the ceiling. lot of multipath which can affect the...

21 January 2021 9,437 3 View

Is stabilizer good to use while designing an antenna using fabric?

13 January 2021 2,473 4 View