Why the results when using wall thickness and when using shell conduction are different in ansys fluent?

Actually, I am running cfd simulation for a heat exchanger which has two fluids one hot and other one is cold fluid. there is a solid domain between them, which I removed and instead I have used...

01 March 2021 9,537 2 View

How much pressure we can reduce at the outlet to avoid Reverse Flow?

I am simulating Heat Exchanger. I have tried and tested all the methods to resolve this issue from the internet like refining mesh, improving skewness and orthogonal quality ,extending outlet to...

01 March 2021 6,985 3 View

Does anyone know to clarify these changes?

01 March 2021 1,290 2 View

What is recommended for solid domain in ANSYS FLUENT?

Should I mesh the solid domain ? or should I use wall thickness? or Shell conduction? for Heat Transfer between two fluids of a Heat Exchanger. what is recommended?

01 March 2021 9,785 3 View

Can Virtual Servers (remote dekstop manager) run heavy ANSYS Fluent CFD simulation ?

I have a virtual machine. My host Pc specs are not that good thats why i went for virtual servers. so basically my host pc has 8gb of ram with nvidia quadro k2200 4Gb DDR5 GPU ,processor intel...

01 March 2021 8,415 1 View

What is the difference between PBE and PBEsol functional?

Hello, I am a 3rd year chemistry student and I'm writing my project report on computational chemistry. does anyone know how PBEsol improves upon the PBE functional? Thanks in advance

19 February 2021 7,068 4 View

Can someone help me with this error that I am getting while estimating a VAR model in R?

I am using annual time series data to estimate a VAR model in R. However, when I run the command to find the optimal lag length, I get the following error: Fehler in VARselect(data, lag.max = 10,...

18 February 2021 9,647 3 View

In your experience what is the difference between G.652D and G.655D optical fiber. In field and in lab?

In our current era there is a big confusion about the usage of G.652 and G.655 optical fiber cable. Theoretically G.655 is much better than G.652 but the operator feel that G.652 is giving almost...

11 February 2021 4,006 8 View

How many dilutions are good enough for TCOD50 of SARS-CoV-2?

I started with 10e-1 till 10e-10. But when I searched for online calculator they mostly consider 5 dilutions. Is there a reason behind it or I should make less dilutions?

11 February 2021 5,839 3 View

Protocol for bacterial samples preparation for Scanning Electron Microscopy ?

I want to prepare bacterial samples to observe the bacterial cell lysis by bacteriophage protein (endolysin) through scanning electron microscopy. Please, anyone can share the protocol of...

01 February 2021 1,173 3 View

What are the countries most affected by extreme rainfall as a result of climate change?

Increased heat, drought and insect outbreaks, all associated to climate change, have increased wildfires. Decreasing water supplies, declined agricultural yields, health impacts in cities owing to...

01 March 2021 7,168 9 View

How can you bring two structures together to create an adhesive bond in LAMMPS?

I have created an Ice 1h crystalline structure and an Aluminium substrate structure and equilibrated both at 250K. Now I need to bring them together in a way that an adhesive bond is created....

01 March 2021 3,325 2 View

Necessary tube lenght to cool Natural gas in a dry-ice cooling bath?

I have a tank which contains natural gas at 250 Bar and 293 Kelvin. I want to cool the gas in a dry-ice cooling bath to about 195 Kelvin. The gas will flow in a copper-tube through the bath with a...

27 February 2021 8,128 1 View

Literature on snowflake aggregation?

I am looking for literature suggestions on the topic of snow aggregation. My main interest is on the aggregation process itself (rather than papers describing aggregate snowflakes characteristics)...

19 February 2021 2,197 3 View

I have done flood mapping using sentinel 1 image but for validation i am unable to find any dataset...what dataset should i download...??

I have done flood mapping using SAR but for validation i am finding difficulty in getting a data set...i opted for LANDSAT image but there i am facing difficulty in cloud coverage as coverage is...

16 February 2021 4,620 3 View

How to raise temperature in small increments during equilibration in LAMMPS?

All, I am trying to equilibrate an Ice 1h crystalline structure to 250K in LAMMPS. When I tried to do this at 250K directly, the structure lost it's crystalline shape and became disordered post...

14 February 2021 5,747 2 View

Global Warming effects?

Hi Professionals! Due to Global warming the earth temperature increases (https://climate.nasa.gov/effects/), which generates floods, storms, and tornadoes because of melting of ice glacier, in...

08 February 2021 9,038 8 View

GIS application in flood management?

What is the best GIS approach in flood management?

26 January 2021 419 5 View

Should the Ice 1h crystalline structure be lost during equilibration process in LAMMPS?

I have created an Ice 1h structure and am equilibrating it 100K in NVT ensemble in LAMMPS for a timestep of 0.25fs in 3000 steps. The potential used is TIP4P/Ice. Although the simulation runs fine...

26 January 2021 9,603 11 View

Cause of an error in running ArcSWAT?

Hello and have a good time When running the SWAT model, I encounter the following image error. Is there anyone who can help me solve this problem?

18 January 2021 6,337 3 View