How to polymerize the stabilized DCPD(Di-Cyclo-Penta-Diene)?

09 September 2019 1 7K Report

Recently, I bought a DCPD stabilized with 4-tert-butylcatecho which prevents the polymerization of DCPD.

Is there any solution to polymerize the stabilized DCPD?

Dear Myoungjin Kim, first you have to eliminate the inhibitor (stabilizer) by one of the techniques widely discussed in RG. Many papers are available on its polymerizations, some are freely accessible. These links are only examples. My Regards

https://www.researchgate.net/publication/268751037_Dicyclopentadiene_Polymerization_in_Solutions_under_the_Action_of_Various_Catalytic_Systems

https://doi.org/10.1016/S1381-1169(98)00091-0

https://doi.org/10.1021/ma950852x

https://doi.org/10.1002/app.1985.070300707

https://doi.org/10.1021/acs.jpcb.7b12316

https://doi.org/10.1627/jpi1958.27.26 (abstract in english)

Badges
Science topic

More Myoungjin Kim's questions See All

Is there any terms representing a sudden crystallization that is not super-cooling?

Hi Recently, I made a solution containing a substance which is well soluble and easily melted under room condition and can be gained through evaporation and drying under vacuum condition. As it...

08 September 2019 2,336 2 View

How to determine or identify the substance is gel?

As I know, gel is a liquid like behavior and viscous. However, it is basically cross-linked between liquid and gellator, such as water + PVA hydrogel. Also, I've heard that not all gel is viscous....

06 July 2019 6,799 3 View

Adhesion strength of coating?

How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...

10 August 2024 942 3 View

How to increase simulation box size?

We intend to study the interaction between peptides and polymer (like PP, PE and PS) through MD simulations using Martini force fields ( Martini 2 for PP and Martini 3 for PE, PS). We have...

08 August 2024 4,842 0 View

How to heat polymer for about 130° without oil bath ?

is there any other way to heat a polymer evenly other than oil bath if so what are those and how to use it

06 August 2024 947 1 View

How to explain the different interaction between soluble and insoluble polymer in water?

Hello everyone, I am try to understand the differences interaction between insoluble and soluble polymers in water with metal ions and how theit charge density (of metal ions) affect the interaction.

29 July 2024 6,350 3 View

Why is it not common to see similar pairs in polymer sliding pairs?

If the pairs are similar, will it reduce the adhesion due to electric charges?

29 July 2024 3,185 2 View

HAs anyone used TGA to find activation enegy of water evaporation?

I have different polymer solutions and I hypothesize that water molecules are retained based on the water-polymer interactions, so the amount of free water is less to intercat with drug tablet....

28 July 2024 9,545 6 View

Interpreting ATR-FTIR Spectra for Microplastics Research?

Hello everyone, I am currently pursuing a PhD in Environmental Engineering with a focus on microplastic studies. My background is in Civil Engineering, and I am relatively new to working with...

18 July 2024 7,258 3 View

How does surface energy affects the solidification of polymer?

Dear All, I would like to ask about the relation between the surface energy and solidification of polymer. If we apply a chemical treatment such as NaOh solution or silane treatment on the...

17 July 2024 190 3 View

I need to know the required time for VDF heating with water for 50-80°C for PVDF Polymerization in ?

i need to know the required time

15 July 2024 4,796 2 View

Kraft lignin and MMA(Methyl meth acrylate) free radical polymerization for synthesis of thermoplastics?

I am conducting free radical polymerization using Kraft lignin and MMA, with DMSO serving as the solvent and there is also an initiator. Following the reaction, I obtain a solution, but I am...

15 July 2024 9,827 1 View