I have CO2 /N2 breakthrough data but I am finding it difficult to normalise the outlet concentration to the feed concentration. Please tell if there is any standard protocol to normalise the data .
I am working on Abaqus/Explicit(Quasistatic ) for the deformation of the auxetic structure model. Please explain how the plastic input value should be considered from the true stress-strain curve...
05 August 2024 454 3 View
How to enhanced h-index in Research Gate?
04 August 2024 3,368 4 View
I want to do wavelet transform of some compounds for their comparative study? Kindly help me in this regard and provide with proper procedure.
31 July 2024 4,170 0 View
I am using CuBr/THPTA for a click reaction in total cell lysates. I am facing issues with my protein sample in non-reducing SDS-PAGE where it's not migrating properly and most of it remains at the...
29 July 2024 950 4 View
How to use energy flexibility in inventory modeling?
29 July 2024 2,192 5 View
Please send me updates regarding the above-mentioned areas in the question mark?
28 July 2024 5,197 3 View
The resin bonded carbon containing refractories are aged before use. How time of aging is determined? And mechanism behind aging.
23 July 2024 3,205 0 View
I'm facing issues with the tumor dissociation protocol for GBM. I use collagenase/dispase with DNase to dissociate my tumor sample. However, even after incubating it for 60mins, I do not get a...
22 July 2024 412 3 View
In breeding trials, environmental variability can significantly affect the results, making it challenging to accurately evaluate the performance of different lines and hybrids.
22 July 2024 3,961 4 View
I have read papers where markup has been taken to measure market power. However, if markup data is unavailable, is it okay to continue with profit margin, as when a company has market power, it...
22 July 2024 707 1 View
I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...
10 August 2024 3,629 1 View
How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...
10 August 2024 942 3 View
How do interactions between the biosphere, the carbon cycle, and the water cycle impact global warming and interaction between the atmosphere and the hydrosphere?
09 August 2024 3,291 2 View
Hello experts, Does anyone know any free software about retention index prediction ?
08 August 2024 7,403 2 View
Dear QE-users, In the method where full MS positive mode and PRM mode are used, we always get an incorrect auxiliary gas reading (41 instead of 25). This only happens in this method; other...
06 August 2024 4,953 0 View
Global ‘Weather’ has stopped, as ‘aqua thermionic instituted by the ‘Global thermo atmospherics has instituted global thermodynamics of 120º C + and thus all waters are, or have boiled into a...
06 August 2024 8,716 0 View
Hello, Can anyone provide me with the absorption coefficient of methane gas at 7.7 um? Any reference?
06 August 2024 980 5 View
Hello everyone, I am researching ways to enhance the quality of lamb milk replacer for machine feeding. I would appreciate any insights or recommendations on the following: Manual vs. Machine...
06 August 2024 6,227 2 View
There are anaerobic gas pak jars and environment providers in the laboratory that provide anaerobic environmental conditions for the growth of anaerobic bacteria. However, there is no anaerobic...
05 August 2024 4,945 3 View
or we can collaborate
01 August 2024 6,705 2 View