Hi
How should I proceed to measure SiO2, Cr2O3, FeO, MgO, Al2O3, etc., which are often present in chromite ore, using a UV device?
What materials and indicators should I use?
I am trying to resect the CG-SMG in mice. Although I can locate the right area as in the attached photo, I could not identify the ganglion. Any help would be greatly appreciated....
28 February 2024 4,672 0 View
I'm currently studying geotechnical engineering. I want to choose a topic and don't have any idea where to start. any suggestion would be appreciated.
30 January 2024 3,897 3 View
I am seeking advice in identifying reliable and specific markers for accurately detecting tumour regions in colorectal cancer mouse cryosections? Any recommendations or insights would be greatly...
03 January 2024 6,040 2 View
I'm currently facing difficulty locating a reference for the transverse joint configuration for widening of a flexible pavement. From memory, I recall using a range of 300mm to 500mm for...
12 December 2023 1,352 4 View
What about Radiation Hazard Indices, IN details?
14 November 2023 3,888 3 View
Recently, I have worked on a subject that I need to analyze the vortex. Is there any good reference (book, lecture, or paper) that illustrates clearly vortex generation, type of them, convection,...
05 October 2023 8,601 2 View
I am currently working on a project that involves analysing and understanding the distribution of wheel wander within a lane. Specifically, I am interested in identifying the probable positions of...
03 October 2023 4,997 4 View
Dear all, I am attempting to download PLUMED in order to conduct enhanced sampling using Gromacs 3 2020. Could you please inform me which version of PLUMED would be compatible with Gromacs 3...
22 August 2023 9,417 2 View
i need a some Reseach and book for calculate of load and torque in shaft propeller and where we can see a damage or failure what information i need find ??
18 August 2023 1,563 0 View
--
09 July 2023 7,142 0 View
A crude extract of fungal culture using EtOH was subjected to column and TLC and partially purified compound was obtained. UV vis spectrum of the compound/s has max absorbance at 218nm. The...
11 August 2024 9,801 2 View
Can anyone explain this method? Especially the last statement where it says only at 1.5 to 2.5mins was the MS/MS connected to the UPLC. How is that possible, is it a feature in this specific...
11 August 2024 8,141 3 View
Hello, Why do i see this baseline drift when i compare my blank (black) to the sample (blue)? Any suggestions as to why this happened? Thank you!
11 August 2024 3,770 4 View
A website software of Blackbody radiation law expert software can used through the following web site. http://39.105.188.151:3000/index
07 August 2024 1,706 0 View
I want to know more about Magnetite deposits.
06 August 2024 1,066 0 View
Hello everyone, I'm encountering an issue with my electrochemical impedance spectroscopy (EIS) measurements and would appreciate some insights. Experimental Setup: Electrodes: Gold interdigitated...
05 August 2024 3,783 2 View
I am in search of a modified Hummer's method, which can be used to synthesis graphene oxide within 6-8 hours. As I am a student it is not allowed for us to work after 5 in the laboratory. So I am...
01 August 2024 8,368 2 View
I'm researching light sources and their UV emissions. I'm curious if a 50W, 7500K conventional LED lamp emits any UV light. I found that a 200W tungsten lamp can emit up to 1.5 mW/cm² at 350 nm....
31 July 2024 3,843 7 View
Following curve related to Co0.6Mn0.4Fe2O4 Magnetic nanoparticles with extra phase a-Fe2O3. I will appreciate to help me to interpretation this spectroscopy, especially the blue line.
31 July 2024 9,140 2 View
Hello everyone, I am new to this characterization but watching videos on youtube I have already plotted a Nyquist plot (Z' and -Z'') and already fitted models on my material using Zsim. But now I...
29 July 2024 1,376 0 View