After prepared it I need make sure that a layer of metal oxide nanoparticales was formed.
You can simply check this by running a CV, and compare this with CV of BGCE, make sure its stable, i.e run at least 10 cycles.
Good Luck
In addition, you might measure EIS, before and after (GCE) modification.
Hello, I have the image on the left, it is an interference pattern and I need to convert in to the surface map "The image on the right", how to do this?
14 February 2023 9,917 0 View
I should say that when capacitors are parallel with input voltage DC, they have capacitor ripple voltage loss cause of direct connection but when a capacitor is in path of charging current -it's...
04 September 2020 9,959 1 View
Does anyone know what is the "sosteric heat of sorption of rice husk, i am working on designing rice husk dryer and could not find any information and data about it.
13 October 2019 8,396 2 View
Dear all, Can we make a list of the available alternatives nowadays to the organic (stilbene) scintillator detector in fast neutron/gamma spectrometry system? Which one is the best? Thank you in...
01 February 2017 240 4 View
Flow-through column experiments are intended to provide a more realistic simulation of dynamic field conditions and to quantify the movement of contaminants relative to groundwater flow.
01 February 2014 6,974 3 View
I deal with images of a DDSM database . The size of these images is very high (e.g. 3000*5000 pixels). I always get an 'out of memory' error when I run them on Matlab.
31 December 2013 6,223 8 View
Is anyone doing research in maintenance of dams using P (M,Lambda,tau) policies?
10 November 2012 2,299 0 View
Hey! It would be interesting to learn about your initial findings. If you are looking for use case in construction - I can help :)
01 January 1970 2,281 1 View
Dear prof., I am lecturer at Cairo University, Food Science and Technology Department. I am writing you if you have a postdoctoral scholar positions. I have an experience in the production of...
01 January 1970 2,803 0 View
Hello everyone, I recently submitted an article to Geotechnical Engineering (Proceedings of the ICE), and the current status has been listed as "EiC Pre-assessment: Ready" for the past 20 days. I...
10 August 2024 6,493 1 View
Metal-containing heterogeneous catalysts often need to be calcined before reduction, so what are some examples of catalysts that perform better without calcination? What is the reason and how many...
05 August 2024 909 2 View
Hello. I am working on ROS production of two systems: system A is cerium oxide and hydrogen peroxide, system B is cerium oxide nanoparticle, hydrogen peroxide and potassium bromide. I did some...
04 August 2024 5,974 3 View
Why BaO (s) + H2O(l) ---> Ba 2+(aq) + 2 OH - (aq) if Oxygen loves owning all the electrons, why would it bind to hydrogen which competes with Oxygen for electron ownership more so than...
03 August 2024 5,392 1 View
I imagine the battery drives the graphite into a carbocation, then chloride is oxidized to donate the electron to the carbocation, but what pushes the lost electrons of chloride to be shared...
03 August 2024 5,384 0 View
How to calculate the molar proportions of the oxides from the XRF analyses?
02 August 2024 2,565 2 View
Hello, colleagues. Recently, I have been working on a metal processing simulation with my UMAT in Abaqus. I have outlined the corresponding simulation, but I keep encountering issues that cause...
30 July 2024 7,062 1 View
Hello Everyone! I am trying to create a metal hydride system where I am trying to create a temperature control with the emphasis on measuring the concentration of the hydrogen with the hydrogen...
29 July 2024 7,577 2 View
What should a Mechanical Engineering PhD scholar focus on during their PhD to enhance their chances of securing a postdoctoral position?
29 July 2024 7,714 4 View
In some data sources it has been grouped in Q1 and some shows it is Q2.
29 July 2024 4,227 2 View