How to input the CDP parameters for ECC,SCC and UHPC in abaqus?

More Muthumari Ganesan's questions See All

Could any one help me with ABAQUS tutorials on concrete infilled double skin steel corrugated plate wall system please?

I am doing research on this topic.

01 January 2021 8,529 0 View

I'm new to abaqus. How to create node in profile steel sheet?

Thanks in advance for my clarification

22 December 2020 3,701 2 View

How to define and get results (stresses) for certain points of a model in abaqus, using python? When the size of the model changes?

I want to do a parameter study of a aixsymmetric cylinder in Abaqus. I want to create several jobs where I get the stresses for 3 different points in my model. These points are defined. I wrote a...

01 March 2021 10,078 1 View

Joint behaviour in Abaqus is not captured well?

I am working on roof joint and trying to simulate the behaviour in Abaqus. I am successful in running the model but the final graph does not follow the experimental curve in the negative direction...

01 March 2021 6,661 3 View

Which one is easier and better at modeling slender masonry structures? ANSYS or ABAQUS?

I need to model masonry and reinforced concrete minarets for my MSc thesis. Which one is easier and better at modeling slender masonry structures? ANSYS or ABAQUS? (Or any other program for just...

01 March 2021 736 3 View

How to assign different material properties to each element in Abaqus ?

Hello, I am writing a python script to generate my model and write the input file. The problem is I have 1000 elements in my mesh and I want to assign different material properties to each...

01 March 2021 9,511 3 View

How to define tie constraint between rigid body and another part in dynamic explicit model of Abaqus?

Hi dear researchers I connected a rigid body into the part of my structure by tie constraint and then I added displacement to rigid body, in static general step every thing is fine and these two...

28 February 2021 3,442 2 View

How to modify Johnson cook equation in ABAQUS?

I wanted to add an extra parameter to the existing Johnson cook equation in the ABAQUS simulation. How to add those extra parameters. Ref: A modified Johnson-Cook material model with strain...

28 February 2021 4,841 3 View

For modelling epoxy-based matrices (in composites), which model in ABAQUS is the most suitable, Concrete damaged plasticity or Drucker-Prager model?

I am working on developing a micromechanical FE model for predicting kink-band formation in UD composites. To model matrix plasticity, which model, out of Concrete Damaged Plasticity and...

28 February 2021 5,415 1 View

How to find the right number of integration points in second order 3d finite elements?

I am familiar with finite element simulations and numerical schemes like the Gauss Legendre quadrature. I also know that the Gauss integration yields exact values for polynomials up to degree 2n-1...

27 February 2021 6,818 3 View

How can we use a hybrid element in Abaqus Dynamic/Explicit for impressible materials?

Hi, all! How can we use a hybrid element in Abaqus Dynamic/Explicit for impressible materials? I have not find the choice for explicit element in Abaqus CAE. I am wondering whether it is possible...

25 February 2021 9,936 2 View

Is it possible to do optimization for a submodel in Abaqus?

I'm trying to run an optimization in Abaqus for a submodel with no luck, jobs are not being create for submission. Is this even possible? or is Abaqus limited to do Opt. for the model itself...

24 February 2021 4,908 5 View

Wallison Angelim Medeiros

This paper can help you: Article Numerical analysis of eco-friendly ductile cementitious comp...

Faisal Qayyum

To input CDP (Concrete Damage Plasticity) parameters in Abaqus, you need to follow the steps below:

Go to the "Material" menu and select "Concrete Damage Plasticity"

In the "Material model" dropdown menu, select "CDP"

In the "Material behavior" dropdown menu, select "Isotropic"

In the "Material behavior options" section, you can input the CDP parameters such as "Compressive strength", "Tensile strength", "Compressive damage evolution law", etc.

Once you have input all the necessary parameters, click "Apply" to apply the material model to your model

You can find a detailed description of all the CDP parameters in the Abaqus documentation. You can also find several examples and tutorials in the Abaqus documentation that demonstrate how to use CDP in different types of analyses.

Regarding a model input file for ECC, SCC, and UHPC, you can find several examples in the Abaqus documentation or on the internet. You can also find several video tutorials that demonstrate how to input material models and perform analyses in Abaqus. I recommend searching for "Abaqus CDP tutorial" or "Abaqus ECC tutorial" on YouTube or other online video platforms.