To incorporate the BSIM 4.3.0 transistor model into the ADS (Advanced Design System) Simulator, follow these steps:
Ensure you have the BSIM 4.3.0 model files. These are usually provided by the semiconductor manufacturer or found on the BSIM website. The files typically include .pm parameter files and possibly other related files.
Open ADS
Go to File > Create New Project.
Copy the BSIM 4.3.0 model files into your project directory. It’s a good practice to organize them into a subfolder, such as models.
Go to File > Design Parameters in ADS. Under the In the Component Library tab, click on Add Library. Browse to the location of your model files and select the directory containing them. Click OK, and add the library to your project.
Open a schematic window. In the component palette, select the transistor you want to model (e.g., NMOS or PMOS). Place the transistor on the schematic.
Link the model to the transistor: Ensure that the model name matches the name defined in the BSIM file.
In the properties window, set any specific model parameters required for your simulation. These parameters should be defined in your BSIM 4.3.0 files.
Before running the simulation, check the schematic for any errors
Md Shahariar Islam Shanto My downloaded files don't have such .pm files. could you share link or any forum details. I downloaded it from the BSIM website.
Use the extracted parameters to format a SPICE model. Follow the manual, in which you can find SPICE 3 parameters of the BSIM 4.3.0 model on pages 157–160. I hope it will help you!