Good Evening everyone, I am facing a problem and I need your kind guidance. I have GDS file of 140 GHz 4CH RX in ADS. I need to check the isolation, insertion loss and crosstalk of the input lines. I imported the GDS in SIwave, define the layout with thickness then export it HFSS 3D EM solver. But all of my circuit elements are not exported properly. Only some portions of it. Is there anything wrong in my process, or what should I do now? Please guide me with proper steps how can I import GDS to HFSS and run the 3D EM simulations? Thank you N:B: I uploaded two pictures of SIWave and HFSS 3D EM solver
Dear Atiq,
It seems that there may be an issue with the GDS file import or the meshing process in HFSS. Here are some steps you can try to import GDS to HFSS and run the 3D EM simulations:
Once the GDS file is imported, you can create the 3D model by using the "Layout" command. You can then mesh the model and define the boundary conditions, ports, and other simulation parameters. To simulate the 3D model, you can use the "Solve" command.
If the GDS import and meshing process still does not work properly, you may need to check if there are any errors in the GDS file or the design rules of HFSS. You can also try importing the GDS file into other software packages such as Ansys SIwave or Cadence Virtuoso to verify if the issue is with the GDS file or the HFSS software.
- Badges
- Science topic