How to extract the values of cutting force and temperature in ABAQUS software after turning simulation?

how to extract the values of cutting force and temperature in ABAQUS software after turning simulation?

06 July 2018 5,779 0 View

Which book/paper contains effect of turning parameters on microhardness of machined surface?

Which book/paper contains effect of turning parameters on microhardness of machined surface?

02 March 2018 5,082 0 View

How to do turning process analysis by using ABAQUS software in terms of cutting force and temperature?

how to do turning process analysis by using ABAQUS software in terms of cutting force and temperature?

02 March 2018 5,215 1 View

How to measure simulated value of cutting force in ABAQUS .cae file for turning process?

How to find out the simulated cutting force values from .cae file in ABAQUS ?

05 June 2017 3,888 3 View

Residual stress measurement facility in Mumbai and Pune (India)?

Where is the facility for residual stress measurement in Pune or Mumbai (India)?

05 June 2017 956 1 View

Suggest suitable software for SEM image analysis?

Please suggest suitable software for SEM image analysis? how to give dimensions to SEM image?

04 May 2016 6,453 0 View

What are the steps for Turning simulation through ABAQUS software?

What are the steps for Turning simulation through ABAQUS software?

04 May 2016 7,604 0 View

Analysis of turning process through Abaqus software?

03 April 2016 7,281 0 View

Can anyone provide split Hopkinson pressure bar facility for high strain rate compression test of Ti6Al4V ELI in India ?

02 March 2016 504 4 View

Consultancy regarding Machining simulation through ABAQUS software...like chip formation mechanism and temperature distribution in turning process ?

Machining simulation through ABAQUS software any consultancy available in India?

01 February 2016 1,631 4 View

flexibility of polymers chain

effect of double bond on the flexibility of polymers

07 April 2021 0 0 View

Formulation of polymer color flakes

I am writing to request some information for making polymer color flakes. I would appreciate the help.

17 March 2021 0 0 View

What is the production process of CaFe ferroalloys?

I looking for ferro calcium production process

03 March 2021 1,755 4 View

12% ledeburitic cold work tool steel, etched for revealing retained austenite, any help for clarifying?

Hello everyone. Given microstructure image belongs to a 12% ledeburitic cold work tool steel (annealed and tempered). The sample was etched with picral (100 mL ethanol and 4 g picric acid). I...

02 March 2021 4,119 3 View

How Can I bring as much common elements in steel as possible to calculate stable phase(s) in OpenCalphad?

As I was tweaking step-by-step OpenCalphad6 Macros step1.ocm involving phase and thermal property calculation of a High-speed steel, I could not incorporate more than 6 elements in the steel...

01 March 2021 8,840 1 View

How can you bring two structures together to create an adhesive bond in LAMMPS?

I have created an Ice 1h crystalline structure and an Aluminium substrate structure and equilibrated both at 250K. Now I need to bring them together in a way that an adhesive bond is created....

01 March 2021 3,325 2 View

What is the density for pva electrospining?

I'm Juan Carlos, a high school student who is working with electropinning, I made an electropinning machine with a 21g needle and a 30kv high voltage source and the distance between my needle is...

28 February 2021 298 3 View

Is anyone familiar with the cyclic compressive fatigue testing (BS EN 12697 - 25) ?

I would like to get more information on the cyclic compressive fatigue testing (BS EN 12697 - 25) which is typically done for bituminous material in pavement design. Any one can advise on the...

28 February 2021 2,004 3 View

For modelling epoxy-based matrices (in composites), which model in ABAQUS is the most suitable, Concrete damaged plasticity or Drucker-Prager model?

I am working on developing a micromechanical FE model for predicting kink-band formation in UD composites. To model matrix plasticity, which model, out of Concrete Damaged Plasticity and...

28 February 2021 5,415 1 View

How to calculate Z (the number of molecules in a unit cell) for calculating theoretical density?

I am trying to calculate the theoretical density of my ceramics materials. I use the formula below to calculate the theoretical density: Theoretical density = (Molecular weight x No. of molecules...

24 February 2021 3,823 2 View