My area lies between E 92.25-92.50 and N 24.50-24.75. When I tried to draw the co-ordinates on QGIS 3.8 map composer, it showed the co ordinates as E 8.00-24.000 and N 0.000-16.000. I used the correct co ordinates and projections but the problem still persists. I took "Decimal with suffix” and used “cm” or “mm” as the interval units. But that should not be a problem because the layer and the project are in the same projections. Please show with illustration how to fix this problem. QGIS grid outines are attached.
With all respect, the issue is not with CRS. I used the same CRS (EPSG:4326-WGS84/UTM Zone 46N) on both project and map. I asked this question on https://gis.stackexchange.com. to an expert, he helped me fix this problem. The issue was with the map unit. I was not using the correct map units proportionate to the interval units. Any way, thanks to all for your time.
- Badges
- Science topic
- Similar topics
- Correction