Dear Ismanizam Abd Manaf,

I suggest you to see links and attached files in topic.

- Numerical coupling of Modelica and CFD for building energy supply ...

www.ep.liu.se/ecp/063/032/ecp11063032.pdf

- Coupling between Simulink and TRNSYS - MATLAB Answers ...

https://www.mathworks.com/matlabcentral/.../265170-coupling-bet...

- Managing Indoor Environments and Energy in Buildings with Integrated ...

https://books.google.dz/books?isbn=3319217984 -

- Distributed Building Performance Simulation—A Novel Approach to ...

https://pdfs.semanticscholar.org/.../9b4ad6b47f606d9824418c9ba...

- [TRNSYS-users] Building a TRNSYS DLL to couple run Simulink and ...

energy-models.com/.../trnsys-users-building-trnsys-dll-couple-run-...

- [TRNSYS-users] Matlab/Simulink - onebuilding.org

lists.onebuilding.org/pipermail/trnsys-users...org/.../017813.html

Best regards

Dear Mohamed-Mourad Lafifi,

Very much thank you for the answers. Really appreciated. Some of the papers I already read and some are very good. If I can get step by step processes on how to do it, will be very helpful for a Matlab beginner user like me. However, I will try it soon.

Ismanizam

Dear Ismanizam Abd Manaf,

Have you successfully linked the Simulink with CFD?

I am stuck with the similar problem (in COMSOL to Simulink)

Please let me know If you have some updates over it.

thanks

Dear Parag Patil,

I am coupled TRNSYS with Matlab. It works for me. Do refer to this link: https://www.researchgate.net/post/Calling_Matlab_Code_with_subroutines_to_TRNSYS

by M Reza Safizadeh. Thanks.

Hello

I read the article about Matlab - Trnsys (step by step instruction) and I hope you can help me as well. I want to build a connection between Matlab and Trnsys and test the example file "SolarCollector". But I always get an error message when I want to build a coupling with Type 155 see Appendix.

My real job at the university is to use a MPC controller (Matlab) to control a multi-zone building in Trnsys. For this I first have to get the coupling using Type155.