I have a signal : 400x6x2x2, I need to convert it to 400x2x2. Which block can i use to do it?
Dear Nooriana
It isn't clear what you mean by "convert" but it looks like the 'Squeeze' block is what you will need at some point.
Best wishes
Tim
Hello. Thank you for your answer. But the squeeze block accepts only signals where there is a 1. For eg, in my case, it will accept 400x1x2x2 and then it will output 400x2x2.
My problem is how to convert it from 400x6x2x2 to 400x1x2x2?
If you want to reduce the amount of data by a factor of six, you will need to specify what process is transforming each of those sets of 6 numbers into 1. Do you want to extract just one element, add them together, average them, etc.?
I need to select each of the 6 once at a time, then merge them together at the end !
It sounds like you need a selector block followed by a squeeze block to do that.
- Badges
- Science topic
- Similar topics
- Engineering
- Electrical Engineering
- Signal Processing