How to calculate mass transfer coefficient for mixed batch reactor?

03 March 2017 0 2K Report

I am using mixed batch reactor for my studies. I need to know calculation steps involved in liquid to solid mass transfer coefficient. Anyone explain its limitation steps also. Thanks in advance.

Badges
Science topic

More Sakthi Sharmila's questions See All

Why Al electrodes are followed charge neutralization mechanism in electrocoagulation process

According to literature, Aluminum(Al) electrodes followed charge neutralization mechanism in removal of anionic dyes due to its positively charged surfaces. If number of sulfonate and hydroxyl...

07 August 2017 7,338 3 View

Anyone know the structure and properties of C.I.Reactive violet 13?

I need the structure of C.I.reactive violet 13 dye for my research purpose. Its commercial name is reactive magenta MB, this cold brand series dye, azo class.

02 March 2016 9,754 3 View

Anyone know how to measure TOC by using dichromate digestion?

In our laboratory, we measure TOC for simple organic compounds using Dichromate method and we get the r2 value is 0.989. For applying the same procedure to dye molecule we didn't get a linear...

01 February 2015 8,518 4 View

Geotechnical Engineering (Proceedings of the ICE) time review?

Hello everyone, I recently submitted an article to Geotechnical Engineering (Proceedings of the ICE), and the current status has been listed as "EiC Pre-assessment: Ready" for the past 20 days. I...

10 August 2024 6,493 1 View

Is it possible to improve the reforming section of the Haber-Bosch process without using air separation units?

A typical reforming section in a large-scale Haber-Bosch process (Figure 1) comprises two reactors. A mixture of methane (CH4) and steam (H2O) is fed into a primary reformer to produce syngas via...

01 August 2024 7,051 5 View

What should a Mechanical Engineering PhD scholar focus on during their PhD to enhance their chances of securing a postdoctoral position?

29 July 2024 7,714 4 View

May I know the exact Quartile of the journal- Advanced Engineering Materials (Wiley) for material science category?

In some data sources it has been grouped in Q1 and some shows it is Q2.

29 July 2024 4,227 2 View

What is the best method to detect the chemical composition of pollen ?

I have multiple small samples of grass pollen with anthers. I want to find a method to identify concentrations of proteins, lipids, and other various elements for these samples. any suggestions?

28 July 2024 5,331 1 View

Ternary in Electrical Engineering?

Dear Research Community I would like to invite Elctrical Engineering specialists to solve problems related to Ternary Algebra or tripple sets I have an algorithm that places in relation three...

28 July 2024 5,771 2 View

What topic or subject does Production Engineering need to address more?

Contemporary scores or innovations in scientific approaches. Hybrid methodologies, emerging themes and cross-cutting issues?

27 July 2024 648 3 View

Can a shoot-through event of a tri-state digital buffer cause momentary Hi-Z state?

// interested in the difference between floating events and short circuits.

22 July 2024 6,565 0 View

Is there a good macro photography kit for on-site metallurgical investigation?

I am looking to purchase a photography kit for onsite metallurgical investigations, such as capturing photos of worn areas, hot tears, cold tears etc. Could anyone suggest me a good...

22 July 2024 3,490 2 View

Hi dear researchers, do you suggest the best and shortest path for chemical synthesis and green synthesis of magnetite(Fe3O4)?

Suggest the best and shortest route for the chemical synthesis and and green synthesis of magnetite(Fe3O4) The chemical synthesis should contain the least dangerous chemicals along with full...

21 July 2024 2,476 2 View