How to build Aero Engine fault diagnostic model in Simulink and Matlab?

More THENNAVARAJAN SUBRAMANIAN's questions See All

How to build fluid structure interaction simulation for elastic ring squeeze film damper in COMSOL?

22 February 2021 5,408 1 View

How to find intensity of research and technology outcomes from the reputed journal paper? Either by research or technology or by both of them?

22 February 2021 5,525 3 View

How to build fouling and erosion simulation model for Aero Engine compressor and turbine rotor in Simulink / Matlab?

22 February 2021 3,697 1 View

H2/CO ratio calculation in dry reforming?

How to calculate H2/CO ratio in dry reforming? This question is for my friend. The ratio should come around 1.0. But the ratio coming 35, 40, 48. CO peak is higher and H2 peak is smaller. What is...

31 January 2021 7,788 3 View

Can anyone suggest which type of sensor input signals are more critical in flying aero engines for on-board diagnostics?

Can anyone suggest which type of sensor input signals are more critical in flying aero engines for on-board diagnostics? and high potential sensors for prognostics?

18 January 2021 4,087 1 View

How to build aero engine fuel system online prognostics simulation model using Matlab, Simulink and Simscape?

17 January 2021 5,181 1 View

How to predict remaining useful life (RUL) on used aeroengine and its components level?

How to predict remaining useful life (RUL) on used aeroengine and its components level? (or) Any standard mathematical relations for RUL?

17 January 2021 8,127 3 View

For dissolving haloalkanes which is best solvent - polar or nonpolar?

For dissolving haloalkanes which is best solvent - polar or nonpolar? How much quantity of solvent is required if the solublity is unknown.

12 October 2020 3,447 4 View

Why the color of dichloropropane changed?

The color of dichloropropane changed from colorless to brown color during distillation. The actual color of dichloropropane is colorless. Why the color changed. Thank you

27 September 2020 3,216 3 View

Conversion of Dichloroalkane into Alkanediols?

I need to convert 1,2-dichloralkane to alaknediol using reflux condenser. The dichloroalkane is insoluble in water. Hence i need to take methanol/ethanol as solvent. For substitution reaction i...

14 September 2020 6,292 3 View

Timeout error!! Processor in the loop (PIL) using STM32F4 Matlab 2018a?

Dear Researchers I am trying to perform a PIL simulation using STM32F4 Discovery board and comunication serial USB TO TTL. During simulation I receive the following timeout error: An error...

01 March 2021 2,327 1 View

How to eliminate Steady state error from Reinforcement learning genetic algorithm code?

The following code (see 1st 2 images attached) is used to produce PID controller values that are designed to control the system (G). The code finds the PID controller values (noted as k) by using...

28 February 2021 6,560 14 View

How to prevent ANFIS Model from negative prediction values in MATLAB?

I have input and output data set for "ANFIS modeling in MATLAB", and I am getting some negative predicted values of output in testing. However, the predicted values of output in training are...

28 February 2021 3,459 3 View

How does an AC-DC power supply Flyback Converter Based USB Charger Model using Matlab/Simulink looks like?

I am required to learn about Flyback converters and I got stuck not knowing to full design of the power supply flyback converter Based USB Charger Model using Simulink, especially the design model...

25 February 2021 5,435 2 View

Please. Could you help be in implementing Fractal Discrete Cosine Transform algorithm in Matlab?

I do need the Matlab code of Fractal Discrete Cosine Transform (FDCT). Can anyone who has already implement this code, help me with the implementation of this transform?

24 February 2021 5,602 2 View

D2D implementation in Matlab in Vienna LTE software?

Hi Hope you are well. Can you please share your code for D2D implementation in Matlab. I want to implement D2D in Matlab based Vienna simulator and struggling to deploy D2D. Thanks

24 February 2021 9,378 3 View

Multi effect distillation modeling in EES?

Dear colleagues If anyone has a model of multi-effect distillation in EES or MATLAB software, please send it to me.

24 February 2021 7,282 1 View

What program can I use to caclulate dipole moment efficiently and without the need of excessive computation?

Hi, I am a third year chemistry undergrad doing my group project in which I need to predict the HPLC retention time of 20 aromatic molecules. to do this we require the chemical properties of these...

24 February 2021 1,384 3 View

Does anyone ever solved this following Matlab error : "Error using imaqdevice/start (line 95) pointgrey: Failed to stop the camera acquisition." ?

I use Matlab 2014b to capture some images with a PointGrey camera connected with USB3 port. I initialize the camera in a function which basically execute these followed lines : vid =...

22 February 2021 6,386 1 View

How to build fouling and erosion simulation model for Aero Engine compressor and turbine rotor in Simulink / Matlab?

22 February 2021 3,697 1 View

Muhammad Ali

Have a look at https://link.springer.com/article/10.1007/s42452-019-1604-z?shared-article-renderer

https://www.hindawi.com/journals/ijae/2016/7892875/

http://theses.gla.ac.uk/8744/1/2017AsifMSc%28R%29.pdf

THENNAVARAJAN SUBRAMANIAN

Dear Muhammad,

Thanks for your inputs. Kindly share related to Turboprop engine simulation using simulink and matlab.

With best regards

Mohamed Elgohary

First you must collect a lot of data as input and output, then you can use ANN model in Simulink, if you interested we can work together thanks