How do Design of Metallic Yield Damper?

Mehdi Ebadi Jamkhaneh @Mehdi_Ebadi_Jamkhaneh

09 September 2018 1 10K Report

Dear researchers

I want to design of MYDs in steel moment-resisting frames. How do I determine the parameters of MYDs? Can I design those based on a distribution of shear stroies? Or consider based on allowable drift?

Badges
Science topic

Suggestions on how to simulate a spray particle drift causes by propeller downwash in Ansys?

I'm trying to setup a simulation that tracks particles from a spray nozzle mounted under a propeller blade. I need suggestion on how to setup this simulation in fluent.

05 January 2021 4,147 2 View

What is the effect of the large scale of behavior particle in a magnetic field?

As it is known there is a magnetic field in large scale universe, so the particle undergoes a magnetic field will be different in case of expanding universe or static one as it will be in the...

13 June 2020 6,258 3 View

How to deal a random walk model with a drift?

I'm regressing households' spending (PCE) on disposable income (PDI) between 1980 and 2018 for the U.S economy. I noticed that the coefficient of PDI is higher than 1. I first think that coeff. of...

04 June 2020 9,615 1 View

What is the reason for baseline drift of XRD pattern at relatively high temperature?

What is the reason for baseline drift of in-situ high temperature XRD pattern at relatively high temperature? Cu K(alpha) radiation was used for the in-situ high temperature XRD measurement of...

11 December 2019 7,149 6 View

No title

I am wondering is there any permanent torsion limit for buildings specified in the codes? for example how much a concrete building is allowed to twist permanently (due to foundation twist or...

08 September 2019 4,267 2 View

SEM Image Shift Causes and Solutions?

I am viewing fixed phytoplankton cells (on cover plate) under SEM. I gold coated the sample with 30mAmp for 240 seconds and mounted the cover plate. First time when I observed the plate, the cells...

14 June 2019 7,577 6 View

SEM Image Shift Causes and Solutions?

I am viewing fixed phytoplankton cells (on cover plate) under SEM. I gold coated the sample with 30mAmp for 240 seconds and mounted the cover plate. First time when I observed the plate, the cells...

05 June 2019 2,756 6 View

Why is the UV baseline drifting down during ion-exchange with FPLC?

Buffer A contains 25mM MES pH 6 10mM NaCl and 10mM BME buffer B contains 25mM MES pH 6 500mM NaCl and 10mM BME. When we run an increasing gradient of buffer B for ion exchange protein...

05 June 2019 7,253 4 View

Causes of Retention Time Drift in HPLC?

03 April 2019 1,928 2 View

An article to validate a LRB base isolated steel moment frame building ?

Hello I need an article to validate a steel moment frame building model, isolated by LRB base isolators. I want to validate parameters like base shear, drift or accelerations. can anyone help me?

03 April 2019 5,242 4 View