I am trying to measure the amount of Carbon dioxide (CO2) in the gas mixture, the most contain of this mixture is Nitrogen
By especail senser
Thanks a lot
If you pass the gas mixture in calisum hydroxide solution the presptation calisum carbonate are the products then you can calculate the CO2 from the presptate
Thanks a lot Doctor Jamal,
I will try this method, but I have a question:did the reaction between the calcium hydroxide and CO2 in gas mixture is spontaneous?
Traveling, more Conference, Tourism, talk about your plan maybe I can be your partner, I am sereaching tourism and work partner during the second half of June, July, and August I am waiting for...
04 May 2018 135 0 View
I have micro polyethylene powder, and want to get nano particles such as milling or any mechanical method. Could I get the Nano by chemical method? Best regards Mohammed
05 June 2017 6,487 0 View
Could anybody tell me a method or a device has to test the anticorrosion of insulated coating for low carbon steel content steel-106?
04 May 2017 272 4 View
11 December 2016 9,631 0 View
07 August 2016 994 1 View
06 July 2016 1,495 4 View
Semi-Solid material (e.i like wax)? OH (inter molecular hydrogen bonding), C-H, (CO), and asymmetrical C-O-C , Also can I know the exact percentage composition of this material by FTIR? Material I...
04 May 2016 5,286 9 View
I need to reduse the Bitumen viscosity for concrete coating purpose
03 April 2016 7,079 3 View
For example: Degradation of Polyethylene Terephthalate (PET), FTIR couldn't give the total composition of materials, but focus on the bonds have been appeared.
01 January 1970 8,133 4 View
01 January 1970 3,007 0 View
Dear All, I want to quantify carbon deposition on the surface of the CuZnAl catalyst. I have tried thermogravimetric analysis, but I've got weight gain as the active Cu- get oxidised. Does anyone...
01 March 2021 1,907 3 View
I am a student of MS Environmental Engineering and started my research phase. I am working on metal removal ( chromium iii ) by using activated carbon prepared from the agricultural feedstock. So...
01 March 2021 5,475 2 View
I want to cool Natural Gas from 195 Kelvin to 138 Klevin in a heat exchanger by using liquid nitrogen as the coolant medium. When entering the heat exchanger, the liquid nitrogen will have a...
01 March 2021 6,450 5 View
I am doing my thesis on the nutrient deprivation on the macroalgae Rhizoclonium sp. I will be analysing the levels over a period of roughly 5 days by HPLC-UV and GC/MS. I will be using seawater as...
28 February 2021 6,477 1 View
I have a tank which contains natural gas at 250 Bar and 293 Kelvin. I want to cool the gas in a dry-ice cooling bath to about 195 Kelvin. The gas will flow in a copper-tube through the bath with a...
27 February 2021 8,128 1 View
Hi Guys. I'm a mechanical engineer and have a bit trouble, would be very glad if you could help me with my questions. I have a pressurized tank which contains Natural Gas at 200 Bar and 293...
26 February 2021 6,253 3 View
Dear all, I am trying to perform a MD simulation about the interaction between CO2 and a polymer. I create my model, solvate it and perform the NVT and NPT equilibration. Now I am not able to...
26 February 2021 10,014 3 View
I am trying to obtain the response and recovery times for my gas sensor device. It appears the the response/recovery times are primarily dependant on the flow rate of the gas I inject into the...
26 February 2021 1,511 3 View
Hi all The question is related to TGA(Thermogravimetric analysis). Thermal degradation easily understood but why do samples weight decrease? altough just binding is broked, the weight of...
26 February 2021 1,100 5 View
Dear All, We are using Autodesk cfd to calculate the air flow in a single sided naturally ventilated room, where air flow depends only on buoyancy due to temperature difference between inside and...
25 February 2021 9,602 4 View