If adsorbent pseudo-second-order kinetics, among three which one cannot alter the rate?

In the removal of dyes from an aqueous solution, our magnetic carbon (adsorbent) follows pseudo-second-order kinetics. Hence, among the three materials (adsorbate(dyes), adsorbent (magnetic...

02 March 2016 5,061 1 View

Which technique is suitable to extract gold metal from alloys?

02 March 2015 9,443 1 View

How will you controlled the shape of iron oxides in carbon shell?

01 February 2015 402 0 View

How can one explain the specific capacitance of carbon/metal oxide nanocomposite using impedance results?

*Also send the basic information or any article regarding Impedance *Your valuable suggestion helps to do further work.

01 February 2015 3,906 6 View

In carbon/metal oxide nanocomposites, which shape of metal oxide will give high specific capacitance (F/g)?

I have prepared activated carbon/iron oxide nanocomposites with different shape of metal oxide. i.e. spherical and rod shape of metal oxide nanoparticles were encapsulated carbon material. I have...

01 February 2015 978 3 View

1. How to make a battery set-up using activated carbon/iron oxide composite powder?

31 December 2014 4,006 3 View

MD MOE RMSD

How to calculate the RMSD values for a MD simulation using MOE?

07 August 2021 0 0 View

MD MOE RMSD

How to calculate the RMSD values for a MD simulation using MOE?

07 August 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

flexibility of polymers chain

effect of double bond on the flexibility of polymers

07 April 2021 0 0 View

Formulation of polymer color flakes

I am writing to request some information for making polymer color flakes. I would appreciate the help.

17 March 2021 0 0 View

What kind of fluid could I use for a pitfall trap that also does not invalidate molecular testing?

Hi, I want to start testing pitfall trap to obtain ants samples, but I need to conduct molecular analysis on those insects. So, what kind of fluid can I use? Ethanol expires too early and I need...

03 March 2021 5,978 5 View

What is the production process of CaFe ferroalloys?

I looking for ferro calcium production process

03 March 2021 1,755 4 View