Hi,
In relation with other OAC like LinuxCNC, ROS, OMAC etc., What is the difference with this project?
Best regards.
hi
I hope this will help.
1.this project is based on windows environment
2.the motion control is the key difference...user can define the detail of interpolation, such as pos,velocity, acc..ect
this is very different with OMAC, their motion control can only for use..user can not freely modified.
3.Usually, there are three type of OAC.
embed, motin control card, all software control. We are the third one.
If you are interested in this project.please leave your e-mail or something that we can communication more easily.
I am very interested in this project. My e-mail is [email protected].
Regards.
ABB flexpicker was designed for pick and place purposes in high velocity in comparison with serial robots. In this way, precision in food companies is not very important in some way. If...
31 December 2017 3,313 2 View
I am working with calibration of industrial robots, for that reason I need a measurement of robot tool with some error in relation with commanded position. Can I simulate in robotstudio position...
10 November 2017 1,027 3 View
Hi, Recently, a lot of data are available to use with NN, especially system modeling. Are you working anything according with robot models, focused in kinematics model? Best regards.
01 January 1970 4,619 2 View
Greetings When one is to perform Simulation or modelling of Pyrolysis of Biomass Waste materials using Aspen Plus software, and one has both the macromolecules breakdown (Cellulose, Lignin and...
06 August 2024 5,023 1 View
Larger brains, which typically contain more neurons, store and transfer more information (Tehovnik and Chen 2015), but the precise relationship between number of neurons and information has yet to...
05 August 2024 1,238 2 View
Hello. I am working on ROS production of two systems: system A is cerium oxide and hydrogen peroxide, system B is cerium oxide nanoparticle, hydrogen peroxide and potassium bromide. I did some...
04 August 2024 5,974 3 View
Why BaO (s) + H2O(l) ---> Ba 2+(aq) + 2 OH - (aq) if Oxygen loves owning all the electrons, why would it bind to hydrogen which competes with Oxygen for electron ownership more so than...
03 August 2024 5,392 1 View
I heard an explanation about something being a better proton acceptor or lone pair donor but that doesn't make sense. I couldn't explain in in terms of acid-base theory. The hand-waving way I saw...
03 August 2024 9,918 0 View
Dear all! Oxygen vacancies do raise negatively the Fermi level by increasing the negative charge in the semiconductor crystal structure. In the case of n-type semiconductors, I wonder if this...
30 July 2024 8,339 2 View
Cuáles fueron las tendencias en investigaciones en arquitectura, urbanismo y patrimonio edificado en decadas del 2000 al 2020? Porque requiero conocer tesis de posgrado nivel maestría...
24 July 2024 5,494 1 View
I came across the Green Building and Sustainable Architecture collection under Nature Scientific Reports some weeks ago. https://www.nature.com/collections/gajghaebce The special issue/collection...
10 July 2024 5,533 1 View
One problem w the BOD bottle type of OUR measurement is that it can only be used in a system that is not DO limited (typically assumed about 2 mg/l or more). If the system is running at low DO and...
01 July 2024 1,282 2 View
Have we ever used LSTM architectures on Time-Series Forecasting and Analysis, and gotten a decent result ?
30 June 2024 6,924 3 View