I am trying to get Mott-Schottky plot of semiconductors after co-catalyst loading. Please provide me the detail of the experimentals for the electrochemistry.
Thanks a lot.
There are some references for works that address this topic for this in the following document
Thanks Sankalp
I tried to make thin films of metal oxides on ITO glass by spin coating, dip coating and doctors blade method. All the procedures failed as metal oxide is coming out in the buffer solution. How to...
02 March 2013 7,948 9 View
01 January 1970 8,943 4 View
In some materials, properties such as band gap, thermal conductivity differ along different crystallographic axes. What are the basics?
01 March 2021 1,923 3 View
I have several question regarding the MOR; hope anyone help me better understand. 1- in CV using (KOH+MEOH) what is the indication of absence of the redox peaks? shouldn't they exist as a sign...
28 February 2021 4,851 8 View
It is a general practice to introduce Ground Plane in FDSOI devices under the BoX. The Ground Planes are introduced by Ion Implantation through Top Si layer and Buried Oxide. I wanted to know that...
24 February 2021 5,974 4 View
Does the absorption coefficient of the semiconductor changes with the change in the structure of the semiconductor? If you have a thin film and nanowire of the same semiconductor, will the...
23 February 2021 9,799 4 View
As a beginner in electrochemistry, I tried to obtain cyclic voltamograms of commercial anatase powder deposited on an ITO substrate or on Eteck. After several attempts, I noticed that my cyclic...
23 February 2021 3,175 3 View
I performed a Proton NMR of graphene powder prepared by electrochemical exfoliation technique. It shows some peaks. But I can't understand it.
21 February 2021 8,947 3 View
I have a direct band gap material and an indirect band gap material. If I made a composite of both through physical mixing. Then how can I determine the band gap of such a material as the Tauc...
17 February 2021 8,104 4 View
Can anyone recommend some any software/models available that can predict substance reactivities and the reaction yield under a specific set of reaction conditions process and proposing pathways to...
17 February 2021 2,383 3 View
I have several questions, What reference electrodes is commonly used for aqueous electrochemical systems? What reference electrodes is commonly used for electrochemical systems which used...
06 February 2021 6,389 5 View
We are trying to develop a reaction methodology using photoelectrocatalysis.While, we are giving a negative potential of -1.8V, on photoexcitation rise in cathodic wave is observed. What can be...
31 January 2021 5,239 3 View