Is there any thin, flexible conducting wires capable of current carrying of around 0.5-1.0 Ampere?

I want to use connecting wires for the soft robot to deliver electric current of around 1 A (voltage 5V), however currently available wires are quite rigid and they exert negative force for the...

05 January 2021 4,485 3 View

A three electrode sensor inkjet printed gets damaged in few hours of usage in a dynamic media flow chip, any solution for that?

We are using some biosensors which are inkjet printed and are used in the microfluidic chip where media is flowing at the flow rate of around 60 uL/min. However, after the continuous use of few...

05 January 2021 610 2 View

USB based DAQ options with atleast 4 analog output channels and 8 analog input channels other than National Instruments?

National Instruments provides vast variety of DAQ options which are based on LabVIEW, however they are way too expensive when it comes to opting option with high analog output channels (like 4)....

30 August 2020 5,195 6 View

What could be direct/indirect roles of insects (entomology) in current pandemic COVID-19?

Because there is no any vaccine for COVID-19 until and in past insects have transmitted number of diseases like; chikungunya virus, yellow fever, dengue fever,Lyme disease, plague,malaria,...

24 June 2020 9,557 30 View

Automatic Save STARCCM+: Warning ''Insufficient space on the disk''?

Hi Everyone, While running the simulation, I kept the file on ''Autosave'' so that each time step is saved (to avoid loss of data due to internet disruption since I am using VPN) but after 1-2...

13 May 2020 7,645 3 View

Where to purchase flexible connecting wires for soft actuators?

Normal wires (for providing voltage) to soft actuators behave as an obstacle to the actuators and hence the real response of designed soft actuators is not known. can you please share the online...

13 November 2019 5,602 1 View

How to classify a text in to different categories without predetermined labeling?

I want to classify a text of more than 1000 words into a categories. I have a database of 10,000 reports of which each contain more than 1000 words. I want to classify them and would like to know...

04 October 2019 1,554 5 View

Any temperature sensor (other than probe type) reported in Microfluidic system or organ on chip?

Normally, I have seen the commercial temperature sensors of probe type are used for microfluidic or organ on chip platforms. I am looking for any paper in which temperature sensor is reported to...

30 May 2019 7,293 4 View

Why are stator currents flowing during stand by mode on flywheel energy storage system?

Hello everyone, I am working on Induction machine driven flywheel storage system. I am facing problem with stator currents. There are stator currents of the magnitude 10-20A during standby mode of...

11 February 2019 6,868 5 View

Is there any way to cure the collagen for making thin membranes?

collagen is commercially available in liquid as well as in fibrils, is there any way through which we can cure and make a thin layer like membrane using collagen?

16 September 2018 1,444 3 View

Guidelines for survey (question type) analysis?

Hi. Please tell me what guidelines should i need to follow for questionaries' type research work in India. It is not hospital based work, we are conduction basic institutional based qualitative...

03 March 2021 2,037 3 View

Can we classify HV and LV lines based on line length?

I have dataset which shows the length of power lines. I need to classify the lines based on the line length. Is there a rule to classify the High voltage (HV) and low voltage (LV) lines based on...

03 March 2021 4,116 4 View

Irradiation data for JAPAN?

Hi, Could you help me to get the latest (2019, 2020) solar resource data for a particular site in JAPAN? PV GIS and NSRDB data are not in reach to JAPAN, I'm looking for some other database for...

03 March 2021 961 3 View

Resistor definition in Piezoelectric bimorph with ANSYS workbench

Hello, good day! I am trying to simulate similar bimorph piezoelectric harvester with below commands. However, the output power doesn't change with resistor value. Please help to find the reason. ET,10,CIRCU94,0 !SET UP RESISTOR R,1,100000 !RESISTANCE VALUE TYPE,10 !SET ELEMENT TYPE E,1,2 !CREATE RESISTOR BETWEEN NODES 1 AND 2 Thanks in advance Regards,

02 March 2021 0 0 View

How to access MSCI KLD Stats and Sustainalytics?

Hello all, I'm currently working on my undergraduate thesis and I'm having difficulties trying to access KLD Stats and Sustainalytics because my campus Airlangga University and apparently other...

02 March 2021 8,525 1 View

Ideas for Phd's Thesis on pricing (Marketing)?

Hi everyone, I'm studying Marketing and I would like to write my PhD thesis on the topic of pricing. Any specific ideas?

02 March 2021 9,706 5 View

No title

02 March 2021 3,060 3 View

No title

02 March 2021 932 1 View

APA 7th In-Text citations with two references with three authors with the same surname, but four different author?

I have an issue with APA 7th in-text citation. II have two papers where the first three authors are the same, and the fourth is different. I am using the Mendeley desktop app, and automatically it...

02 March 2021 790 3 View

How to calculate BREQ 3 questionnaire?

how to calculate BEHAVIOURAL REGULATION IN EXERCISE QUESTIONNAIRE BREQ 3 ,which contain 24 questions and each question has 5 answers (0- Strongly disagree , 1-disagree, 2- Neither agree nor...

02 March 2021 811 3 View