Does anyone know of reputable suppliers of Ionic liquids?

What is the solvent for 8YSZ nano material?

I need to do some experiment with it in liquid form.

07 August 2024 613 3 View

Hi, please what is the best tool on Aspen plus that can help me get the best inlet temperature and pressure for cryogenic distillation?

I am trying to recover liquid CO2 from a mixture of 0.6 CO2, 0.3 N2, and 0.1 O2. My aim is to recover about 99% liquid CO2 at the bottom of the column and make sure the amount of gaseous CO2...

06 August 2024 4,611 0 View

How much Yeast should we add to fermentation media?

I have prepared a liquid broth containing Yeast (S. Cerevisiae) that i need to add from it to fermentation media of lignocellulosic hydrolysate. I need to know based on what parameters do we add...

06 August 2024 662 1 View

What is the best protocol for freezing the rat brain in preparation for protein detection by Elisa ?

What is the best way to freeze the rat brain - liquid nitrogen, Dry ice , isopentane - after isolation for later protein investigation by Elisa?

01 August 2024 1,722 1 View

How can we conduct DFT for solutions or mixtures ?

Can we conduct DFT studies for Ionic Liquids with Amines at various concentrations? If so, how can we proceed with these studies? Additionally, what parameters, besides IR, NMR, and HOMO-LUMO, can...

18 July 2024 319 1 View

What does an additional peak in FTIR between 3100 and 3300 nm affect the quality of the material, benzethonium chloride USP??

I do not know much about FTIR! The material Benzethonium Chloride USP was compared to a reference standard in regards to FTIR, as per the USP testing: Identification B. Infrared absorption (FTIR),...

16 July 2024 6,918 7 View

Has anyone tried freeze flow samples in -80C freezer or liquid nitrogen before processing?

Our lab has some radioactive cell samples that need to be kept frozen for at least 30 days before flow analysis. For some reason, the samples stored in liquid nitrogen did not perform as well as...

15 July 2024 9,975 1 View

Can a liquid metal-ligand sample be directly analyze in flame atomic absorption spectrosocopy?

Can I directly analyze a liquid metal-ligand sample without acid digestion in flame atomic absorption spectroscopy?

25 June 2024 1,866 2 View

What type of paraffin is recommended for preparing samples for cutting with a microtome?

Sample type: Corn leaves and stem Bean leaves and stem

22 June 2024 2,082 3 View

How to size an liquid jet ejector to raise pressure of suction gas?

How to size an liquid jet ejector to raise pressure of suction gas.I need to get dimensions for simple compression and also for absorption of say CO2 in Water

13 June 2024 4,551 0 View

Bruce Levison

Visit: http://www.internetchemistry.com/market/ionic-liquid.htm

Rafał Bielas

BASF

I had problems with quality of bistriflimide ionic liquids from Merck

Boyan Iliev

BASF actually has only 3 ILs in their portfolio. It will not be very modest to say which supplier has the biggest portfolio and the best quality/price ratio.

Cabinet chivimbiso musuna-garwe

Sigma Aldrich supplies ionic liquids.