We have used "DAQ2GO" to revive some of our instruments with obsolete software and broken electronics. We have also used it to make our own autosamplers and a robotic unit. Now we want to use some autosamplers of one brand on units on units of different brands. DAQ2GO is capable of doing this, and knowing the pinouts or having schematics would make the job much easier.
Dear Scot,
I suggest you to see links and attached file in subject.
-Agilent InfinityLab LC Series 1260 Infinity II Preparative Autosampler ...
https://www.agilent.com/cs/library/usermanuals/public/G7157A-User.pdf
-1020 Cable Electronics - PDF - DocPlayer.net
https://docplayer.net/23213574-1020-cable-electronics.html
-1290 Infinity II Preparative Open-Bed Fraction Collector - PDF
sportdocbox.com/.../77143034-1290-infinity-ii-preparative-open-...
-1260 Infinity Quaternary Pump Vl User Manual | Electrical Connector ...
https://es.scribd.com/.../1260-Infinity-Quaternary-Pump-Vl-User-...
Best regrads
Thanks, M Lafifi, but these references no not provide any useful information for external control or the functionality of the connector pins on the cables of the modules. The manuals you reference are operator's manuals which force you to use Agilent software and do not provide any useful information to use the modules in other ways except their proprietary closed source software. We wish to use a more flexible and less cumbersome software, and we wish to modules from various vendors in 'mix and match' ways.
- Badges
- Science topic
- Similar topics
- Instrumentation Engineering
- Instruments