Dear Mr Mahdi

My PhD thesis was on the vibration of cylindrical liquid storage tanks. In addition am the supervisor of five master of science degree student in structural engineering on the subject of dynamic and vibration analysis of shells and liquid storage tanks.You can find some of these articles in my publications in RG.

Based on my knowledge and experience in this field, you can study the following proposals:

1. Nonlinear behavior of shells under seismic loading

2. Analysis of non-anchored liquid storage shells ( having base separation)

3. Effect of baffle configuration on the fluid-structure interaction in storage tanks

4. Analysis of thick shells

5. Shells having circumferential rings and longitudinal stiffeners.

Finally, do not hesitate to ask about any information pertaining to this topic

I would be very happy if I participate (for free) in the supervision of your thesis in the future.

wishing you good luck

Dr Abdulamir Atalla

University of basrah - Iraq

Dear Mr Mahdi

My PhD thesis was on the vibration of cylindrical liquid storage tanks. In addition am the supervisor of five master of science degree student in structural engineering on the subject of dynamic and vibration analysis of shells and liquid storage tanks.You can find some of these articles in my publications in RG.

Based on my knowledge and experience in this field, you can study the following proposals:

1. Nonlinear behavior of shells under seismic loading

2. Analysis of non-anchored liquid storage shells ( having base separation)

3. Effect of baffle configuration on the fluid-structure interaction in storage tanks

4. Analysis of thick shells

5. Shells having circumferential rings and longitudinal stiffeners.

Finally, do not hesitate to ask about any information pertaining to this topic

I would be very happy if I participate (for free) in the supervision of your thesis in the future.

wishing you good luck

Dr Abdulamir Atalla

University of basrah - Iraq

Thank you Dr abdulamir for your really good guide and sharing experience.  Your field is mostly seismic based but I wanna work on mechanic of shells. Buckling and its prevention with applying FRP on it is an issue for example. But as you said many other genius ideas can be found. Please see my supervisor professors page in RG (Hossein showkati) to have a good vision of my idea. Of course I will ask your guide and I will be wondered if you help me with your experience.

Best wishes

Mahdi Haghdoust