hello guys
I'm working on my PhD project and using DIgSILENT power factory 15.1.7 , project including renewable sources and generators, to add generator as a distributed sources I'm in trouble with sources synchronization /I found a file in in DIGSILENT HELP but it runs only in version 17 and earlier which I don't have access to I'm wondering if someone has an idea how to synchronize
generator with system or how to convert this file or even would be great if send me a schematic model of this controller
thank you in advance
I run Your case in 2019 version I see it is a nine bus IEEE system. Power flow runs well.
Which generator you need to synchronize. You have 3 generators and use RMS model. You have a voltage AVR model and PSS model in all generators. I do not see any relay or synchro check relay who will control synchronization?? Unfortunately, I have no RMS and EMT module in this version :-( I think that you need to use synchro checker to the generator you want to synchronize. Define the time of starting that generator and the device will control the switching on the generator on the system in relay setting. Many relays in DIgSILENT database have that function, for example, SIEMENS SIPROTEC 7VK61 or ABB SPAU140C. You need to put VT and connect the synchro checker to the cubicle where is the generator breaker.
Srete
- Badges
- Science topic
- Similar topics
- Filing