I'm trying to buy Ubbelohde Viscometer from Cannon Glass CO. to measure a viscosity of one prepared polymer. According to this company the size was terminated as 0, 0C, 0B, 1... etc.So which size that is compatible with d=0.6mm.
Are the Ubbelohde viscometers (0, 0C, 0B, 1... etc.) have the same capillary diameter?
If there not, so which one is in the range of 0.6 mm.
Thank you for your response.
Dear J. Sanchez, Thank you so much for your fit answer.
Thanks a lot Sanchez and Habib for this informative discussion
Dear all, Are there anyone send me a standard (ASTM) procedure to determine the solubility of a prepared polymer at aqueous buffer solution? We are trying to prepare an aqueous soluble polyimide...
31 December 2015 8,098 9 View
I'm trying to synthesis a porous polyimide from the reaction of melamine and pyromellitic dianhydride and faced some problems in interpretation of its IR spectrum.
05 June 2014 8,989 0 View
In my lab. I prepared a difunctional monomer, which contains two similar vinylic groups. Is there more than one exotherm that represents the homopolymerization and crosslinking polymerization...
31 December 2013 2,672 4 View
Are there any method for quantitative and qualitative determination of UV absorber in polyethylene bags, sheets, pipes and others?
01 February 2013 7,189 3 View
Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...
02 March 2021 4,910 3 View
Is There Any Feasible Method To Test The Efficiency Of Fluorescent Compounds Other Than UV Spectrometers ? Suggestions Would Be Appreciated !
02 March 2021 5,785 3 View
I am going to have 3 different probes in my qPCR work that I am going to do. But I realized that the machine we have in the lab is a Rotor-Gene Q 2plex HRM Platform, saying it has green, yellow,...
01 March 2021 8,544 1 View
I want to build a low-cost polarimeter to study circular dichroism (chirality). What type of samples can I use? I am looking for samples that can be found outside the laboratory.
01 March 2021 9,101 3 View
Hi all, I have been working on the quantification of chitin in insect samples and feed for a while but I can notice that the quantification methods (e.g. exposure to HCl, NaOH, and weighing sample...
01 March 2021 1,843 2 View
Hello, I spin-cast two different polymers onto wafers and measure their height as a function of initial concentration. For polymer A, I have the weight-average molecular weight (Mw) as well as...
28 February 2021 7,882 2 View
I'm Juan Carlos, a high school student who is working with electropinning, I made an electropinning machine with a 21g needle and a 30kv high voltage source and the distance between my needle is...
28 February 2021 298 3 View
I am trying to find how to know the density needed for a pva electrospinning in a 0.6mm neddle, the electrospinning will be from top to bottom and the problem I really have is the solution because...
25 February 2021 2,615 3 View
Can anyone identify what kind of Schistosome species this might be? Morphological features of cercariae and adults resemble Trichobilharzia, though I am fairly new to the field of parasitology...
25 February 2021 7,760 6 View
Hello, As part of simulation of gases mixture and water, I need to calculate viscosity of the fluid components and I am using relationships proposed by Chung et al. (1988). The irony is while I...
25 February 2021 8,053 5 View