Can anyone suggest a reference to how to blend asphalt binders with Microfibers?
Dear omar
See the attached file may be helpful for you
Best regards
Anyone from University o
31 December 2016 5,166 1 View
Can anyone in the field of Pavements Design Or Highway Materials recommend any good references for " Fatigue Endurance Limit "
04 May 2016 9,765 2 View
Dear all, One of the key points in TSAD (Time Series Anomaly Detection) when using a sliding window is the size of the window. For (quasi)-periodic time series, methods such as AutoPeriod,...
13 May 2024 920 3 View
The gradation of different asphalt mixtures is closely related to the asphalt index, so how to determine whether the asphalt index under different gradation is appropriate in the project?
17 April 2024 7,066 1 View
We have a number of very steep streets with up to 30% grade. Whilst it is unlikely that we would build streets with that grade any more, many still exist with bitumen or asphalt surfaces. These...
25 March 2024 7,469 4 View
What is the right mixing temperature for creating an asphalt mixture sample? Is the mixing temperature obtained from the Bitumen Test Data Chart (BTDC) or other values, such as the recommended...
23 January 2024 8,384 3 View
I'm searching for best blend of waste polyethylene between (high density, medium density and low density polyethylene) for improving mechanical properties of hot mix asphalt against rutting,...
06 January 2024 7,773 3 View
Several morphological characteristics (adaptative or not) could be associated with the process of adaptation to a specific environment or microhabitat. For example, several troglobization...
25 December 2023 5,431 3 View
Dear all, i am preparing a study concerning testing Prime Coat with different applications rates to achieve the optimum rate for a given Asphalt pavement Binder coarse. Kindly please share your...
23 December 2023 447 2 View
1) Is the adhesion mechanism of hot mix asphalt and aggregate different from that of cold mix asphalt and aggregate ? 2) Why does this happen?
10 December 2023 6,853 2 View
for DCSE was determined using the procedures developed by Roque and Buttlar based on IDT tensile strength test and resilient modulus test if ER is below 1 , is the cracking resistance is poor and...
02 December 2023 9,949 0 View
explain your idea
22 November 2023 3,917 2 View