Why the results when using wall thickness and when using shell conduction are different in ansys fluent?

Actually, I am running cfd simulation for a heat exchanger which has two fluids one hot and other one is cold fluid. there is a solid domain between them, which I removed and instead I have used...

01 March 2021 9,537 2 View

How much pressure we can reduce at the outlet to avoid Reverse Flow?

I am simulating Heat Exchanger. I have tried and tested all the methods to resolve this issue from the internet like refining mesh, improving skewness and orthogonal quality ,extending outlet to...

01 March 2021 6,985 3 View

Does anyone know to clarify these changes?

01 March 2021 1,290 2 View

What is recommended for solid domain in ANSYS FLUENT?

Should I mesh the solid domain ? or should I use wall thickness? or Shell conduction? for Heat Transfer between two fluids of a Heat Exchanger. what is recommended?

01 March 2021 9,785 3 View

Can Virtual Servers (remote dekstop manager) run heavy ANSYS Fluent CFD simulation ?

I have a virtual machine. My host Pc specs are not that good thats why i went for virtual servers. so basically my host pc has 8gb of ram with nvidia quadro k2200 4Gb DDR5 GPU ,processor intel...

01 March 2021 8,415 1 View

What is the difference between PBE and PBEsol functional?

Hello, I am a 3rd year chemistry student and I'm writing my project report on computational chemistry. does anyone know how PBEsol improves upon the PBE functional? Thanks in advance

19 February 2021 7,068 4 View

Can someone help me with this error that I am getting while estimating a VAR model in R?

I am using annual time series data to estimate a VAR model in R. However, when I run the command to find the optimal lag length, I get the following error: Fehler in VARselect(data, lag.max = 10,...

18 February 2021 9,647 3 View

In your experience what is the difference between G.652D and G.655D optical fiber. In field and in lab?

In our current era there is a big confusion about the usage of G.652 and G.655 optical fiber cable. Theoretically G.655 is much better than G.652 but the operator feel that G.652 is giving almost...

11 February 2021 4,006 8 View

How many dilutions are good enough for TCOD50 of SARS-CoV-2?

I started with 10e-1 till 10e-10. But when I searched for online calculator they mostly consider 5 dilutions. Is there a reason behind it or I should make less dilutions?

11 February 2021 5,839 3 View

Protocol for bacterial samples preparation for Scanning Electron Microscopy ?

I want to prepare bacterial samples to observe the bacterial cell lysis by bacteriophage protein (endolysin) through scanning electron microscopy. Please, anyone can share the protocol of...

01 February 2021 1,173 3 View

How UAV or drone can be beneficial to better estimate crop yield?

As we know, crop yield estimation has been done traditionally with farmer's expert knowledge, deductive sampling in representative areas, and remote sensing with satellite imagery. Farmer's Expert...

01 March 2021 3,468 3 View

Analysis of CRD two factor using R studio ?

Hello everyone. I have conducted the research on post harvest longevity of tomato crop using plastic packaging and different doses of chemicals as two different factors. The design of experiment I...

28 February 2021 8,189 3 View

Where i will get the Desmodium and Napier grass seeds?

26 February 2021 975 4 View

What are the LAB methodologies (procedures, equipment etc) for CO2 enrichment experiments to study crop responses?

I am doing a proposal for a research entitled 'GRAIN YIELD AND QUALITY RESPONSES OF WHEAT GENOTYPES UNDER CO2 ENRICHMENT AND EXTREME EVENTS' I will be using climate chamber and I would like to...

18 February 2021 6,494 4 View

Any recommendations for methods to analyze elephant space-use (using GPS) and correlating this with changes in NDVI?

For my Masters I am looking into elephant space-use and its effect on vegetation change. I have elephant GPS collar data and was going to use Google Earth Engine to obtain NDVI values. I would...

16 February 2021 7,097 3 View

Can bio-decomposer be a successful alternative to reduce residue burning?

To maintain the proper crop plan most of the times there is not enough time to make the field ready for the next crop. In this particular context , can bio-decompser be a solution? What about...

16 February 2021 7,068 24 View

How much costs direct reduction of nitrogen on farmland in terms of lower crop yield?

Dear research fellows, I wonder if someone knows how much direct reduction of nitrogen on farmland costs in terms of lower crop yield expressed as EUR/kg nitrogen (or similar)? I understand that...

15 February 2021 1,323 3 View

What is the paradoxical effect of VINASSE in terms of low pH (<4) and high EC (>50dS/m)? What is its impact on soil properties and crop growth?

What is the paradoxical effect of VINASSE in terms of low pH (50dS/m)? What is its impact on soil properties and crop growth?

15 February 2021 3,142 6 View

How to obtain regions around the person bounding boxes(excluded the detected people in scene)?

Hi all. I have a set of coordinates of bounding boxes for AVA Dataset. This dataset is used in action recognition. My goal is to get the areas around the people (people are inside boxes) and do...

13 February 2021 2,538 2 View

What can be use to mop up heavy metals from vegetables or soils in quarry mining site?

It has been established that quarry mining site polluted and contaminated it's environment with heavy metals, these affects the crops and vegetables planted in the area. The possible solutions to...

12 February 2021 1,155 5 View