I want to calculate the viscosity of kaolin at different high temperatures, can I use the VFT equation adapted for glass. if there is another method to calculate this parameter please let me know it.
I tried with twice as concentrated PMA/IONO, tried also 4h and 5h incubations, tried different aliquots of PMA/IONO (but same concentration of course) but it doesn't work ! any suggesting please...
10 October 2023 5,765 4 View
What is the benefit of using a physical model to model the power generation (i.el solar field with parabolic trough collectors)? A data-driven method could potentially achieve similar accuracy...
02 August 2019 281 1 View
I need to know how to dilute the furan resin and how can i clean it. what solvent to use ( water and ethanol does not work well) .
12 December 2018 9,466 3 View
What are the better methods to optimise an hybrid system (solar/gas) connected to the grid?
06 November 2017 967 3 View
What is the correlation between dielectric conductivity and bulk density?
01 January 1970 7,488 3 View
Some sources say it is treated as Newtonian as ethylene glycol has a higher viscosity than water, which affects the flow characteristics in simulations. But some also say it is non-Newtonian.
09 August 2024 2,111 2 View
How can we differentiate between calcite, dolomite, siderite, magnesite and ankerite minerals in carbonatite rocks in thin section under optical microscope?
07 August 2024 2,132 3 View
We have an original Alluaudite-Molybdate we want to test for catalysis and photocatalysis applications.
04 August 2024 2,261 1 View
Hi, I am working on a head FE model and want to try different material types on brain. I read some papers that use Mooney-Rivlin rubber model and wondering if i can add viscosity into it. Is it...
24 July 2024 5,908 0 View
https://en.wikipedia.org/wiki/Viscosity
21 July 2024 3,089 4 View
I tried to make slurry for NCM cathode but there was problem in coating process. The detail of my experiment is following; The ratio between active material(NCM811), conductive additives(Super-P)...
08 July 2024 7,327 4 View
Hi all, I am looking for some syntethised samples of mixed-layer clays to perform infrared reflectance spectroscopy measurements in the VNIR-SWIR-MWIR-LWIR regions. Best regards, Lionel Fonteneau
01 July 2024 3,875 2 View
..
30 June 2024 2,340 7 View
In nanofluids, surfactants play a great role in stability. What is the impact of surfactant in viscosity in nanofluids? If surfactant concentration increases, then viscosity will increase/decrease...
24 June 2024 6,288 4 View
I am conducting a study on sandstone samples and need to accurately differentiate between tuffaceous matrix and clay matrix when examining thin sections under a polarized light microscope. While...
20 June 2024 3,270 0 View