Hi,
I am trying to develop basic Heat and Mass transfer model of Absorber column.
Can any one help me to develop model in VB?
Dear Sir. Concerning your issue about the development of heat and mass transfer model VB of Absorber column. I think the following below links may help you in your analysis:
https://pdfs.semanticscholar.org/2420/8c4d613401d3b93dbf8511dc2ccfff0db8ff.pdf
http://www.sciencedirect.com/science/article/pii/S0140700712001934
http://folk.ntnu.no/skoge/prost/proceedings/distillation06/CD-proceedings/paper045.pdf
http://cdn.intechopen.com/pdfs/44840/InTech-Modeling_of_heat_and_mass_transfer_and_absorption_condensation_dust_and_gas_cleaning_in_jet_scrubbers.pdf
Thanks
Thank you very much indeed.
Hello, If i am doing a buffer exchange for an antibody of 1mg/mL, does the elution lose protein in the process of buffer exchange? For example, if i flow through 500 uL of 1mg/mL sample, and...
03 March 2021 6,299 3 View
03 March 2021 5,360 2 View
Hi, everyone. I'm a starter to write a paper by Latex. But I have some difficulty using it. I'm writing the paper with 2 columns. And, there is one figure that occupies the 2 both-sides. I want to...
26 February 2021 3,738 3 View
In Finite element software like ANSYS , there is difficulty in obtaining direct results of twisting of concrete members because SOLID65 which is the unique element designed to represent concrete...
26 February 2021 3,806 2 View
Looking for the quantity of cement, sand, and gravel of footings and columns. Thank you!
25 February 2021 3,092 2 View
I have set up a qPCR run on MxPro with SYBR green and ROX as a reference, however, when I go to the analysis section the program seems to only collect data for the dissociation curves and not the...
25 February 2021 8,039 1 View
I am trying to analyze lipase using the reverse phase-HPLC C18 column. In the literature, 0.1 % TFA was and 60% ACN was used. Can I use TCA in place of TFA? If any other methods are available to...
25 February 2021 2,388 3 View
Hi! I would want to know if I can use acetic acid with an ELITE WAX Perkin Elmer column for Gas Chromatography. This column has a polyethylene glycol phase, but I can't find the manual to check...
22 February 2021 730 2 View
I tried to separate my substance from a protein in a sillica gel column. By mistake, it dried and cracked. Can I save the trapped substance? Can I repack it ,or at least elute all of the trapped...
22 February 2021 1,789 3 View
I know, or think I do, the basic idea behind these natural structures, as from what I know they form due to water dripping from the top leaving a salt deposit behind. But started to wonder about...
22 February 2021 1,400 4 View