Can anyone guide me how to model a breathing crack in ABAQUS/CAE? I am working on a L-joint beam-column connection. I want to model a breathing crack near the joint. Need some guidance?
Thanks in advance
Hi
Refer this video...
https://youtu.be/MQy-kzgyWkM
I want to model a silo using sap2000. But I am stuck modelling hopper bottom. Can anyone suggest how to proceed?
31 December 2017 6,855 0 View
The following error is coming in ABAQUS 6.14 Implicit Co-simulation: THE Abaqus ANALYSIS IS TERMINATED BECAUSE THE TIME INCREMENT IS SMALLER THAN MINIMUM ALLOWABLE INCREMENT SIZE SPECIFIED ON THE...
11 December 2017 4,189 4 View
I am modeling PZT patch in ABAQUS 6.14 involving explicit-implicit co-simulation? The error shown is: Error in job Co-execution-1-Explicit: The executable explicit_dp.exe aborted with system error...
09 October 2017 7,396 3 View
Can anyone explain this method? Especially the last statement where it says only at 1.5 to 2.5mins was the MS/MS connected to the UPLC. How is that possible, is it a feature in this specific...
11 August 2024 8,141 3 View
We have observed that tube to tube sheet joint leaked in our boiler and needs to overcome same by knowing the root cause.
08 August 2024 3,161 0 View
I am analyzing cherts from different sources found within one specific geologic formation using ICP-MS/ES. My committee was asking this question about my analysis. I was not sure how to answer this
05 August 2024 7,902 3 View
I am currently researching the impact of environmental toxins on children's health and would greatly appreciate insights from experts in the field. If you are an expert or researcher working on...
02 August 2024 2,627 1 View
I ask Chinese seismologists to inform me: who should I contact to create a joint Forecast Center? I do not hide that the beginning of my work was connected with the successful forecast of the...
22 July 2024 2,276 1 View
I want to know that n-doped side of solar cell is connected with positive or negative electrode.
20 July 2024 1,348 2 View
I studying PhD course in Urban design for Health. I need to know in some fileds: residental block, green open space and Transport TOD. I need connect with expert in that fileds.
14 July 2024 1,892 3 View
i have attached my model and i have used point based mesh independent fastener using attachment points and type of connector is basic cartesian but this is not working as i apply displacement on...
02 July 2024 6,293 0 View
"Today several adjectival phrases have been used to describe English like ‘International Language’, ‘Lingua-Franca’, ‘Language for Globally Connecting’, ‘Library Language’, ‘Official Language’,...
01 July 2024 8,406 5 View
Sharing research simultaneously on both platforms
28 June 2024 9,120 2 View