BJH pore size and pore size distribution?

More Abubakar Danmaigoro's questions See All

On what basis will an article be with an Editor for over two months?

Especially unpaid Journals

02 January 2021 9,028 7 View

Please suggest me EI compendex conferences with good acceptance rate?

I want to publish a paper at the EI-Compendex conference, please suggest a conference with a high acceptance rate. My field of research is IoT security and cryptography analysis.

19 October 2020 5,365 3 View

No title

Despite the high CO2 of the Paleozoic atmosphere, when CO2 levels were greater than 4000 ppmv (parts per million by volume), scientific evidence indicates a period of glaciation around 445 million...

19 August 2020 6,452 3 View

What is the best way to present more than one research problem?

When you have three research problems is it better to write each of the problem with it's solution in same paragraph or write all the problems then the last paragraph should contain the summary of...

03 August 2020 9,805 4 View

How can I eliminate discontinuities in the end-effector plot of an industrial manipulator?

I am trying to solve a dynamic problem for a 3 DOF industrial manipulator and I keep getting funny end-effector plots for the first joint (see the figure). I have tried using the alternate...

21 June 2020 7,931 15 View

Please i need a material or textbook that explains about hybrid energy storage (battery & Supercapacitor) and their energy management?

17 June 2020 8,196 3 View

Please suggest behavioral IoT authentication protocol literature?

I am currently working on IoT authentication systematic literature review. Please suggest the IoT authentication protocol based on behavioural.

26 May 2020 1,238 5 View

Is it possible to combine YOLO and Faster RCNN for object detection to benefit from the detection speed of the former and detection acc. of the later?

I am thinking of utilizing YOLO algorithm and Faster RCNN for localization and detection task, is this easy?

03 March 2020 9,156 4 View

Can anyone tell me which antibodies for Neurons, astrocyte and glial cells were used for FACS sorting?

We are looking for antibodies that efficiently label neurons, astrocytes and glial cells from mouse brain through FACS sorting for RNA Seq. We tried various antibodies but it does not work in...

05 December 2019 5,334 2 View

What is the scientific Validity of the claim that Arabia will one day become a green jungle/rain-forest?

There are many claims that the Arabian Peninsular used to be a green jungle. This article came to mind [Geology (2015) 43 (4): 295-298. https://doi.org/10.1130/G36401.1] Actually the claims are...

25 January 2019 8,279 7 View

flexibility of polymers chain

effect of double bond on the flexibility of polymers

07 April 2021 0 0 View

Formulation of polymer color flakes

I am writing to request some information for making polymer color flakes. I would appreciate the help.

17 March 2021 0 0 View

What is the production process of CaFe ferroalloys?

I looking for ferro calcium production process

03 March 2021 1,755 4 View

12% ledeburitic cold work tool steel, etched for revealing retained austenite, any help for clarifying?

Hello everyone. Given microstructure image belongs to a 12% ledeburitic cold work tool steel (annealed and tempered). The sample was etched with picral (100 mL ethanol and 4 g picric acid). I...

02 March 2021 4,119 3 View

How Can I bring as much common elements in steel as possible to calculate stable phase(s) in OpenCalphad?

As I was tweaking step-by-step OpenCalphad6 Macros step1.ocm involving phase and thermal property calculation of a High-speed steel, I could not incorporate more than 6 elements in the steel...

01 March 2021 8,840 1 View

How can you bring two structures together to create an adhesive bond in LAMMPS?

I have created an Ice 1h crystalline structure and an Aluminium substrate structure and equilibrated both at 250K. Now I need to bring them together in a way that an adhesive bond is created....

01 March 2021 3,325 2 View

What is the density for pva electrospining?

I'm Juan Carlos, a high school student who is working with electropinning, I made an electropinning machine with a 21g needle and a 30kv high voltage source and the distance between my needle is...

28 February 2021 298 3 View

Is anyone familiar with the cyclic compressive fatigue testing (BS EN 12697 - 25) ?

I would like to get more information on the cyclic compressive fatigue testing (BS EN 12697 - 25) which is typically done for bituminous material in pavement design. Any one can advise on the...

28 February 2021 2,004 3 View

For modelling epoxy-based matrices (in composites), which model in ABAQUS is the most suitable, Concrete damaged plasticity or Drucker-Prager model?

I am working on developing a micromechanical FE model for predicting kink-band formation in UD composites. To model matrix plasticity, which model, out of Concrete Damaged Plasticity and...

28 February 2021 5,415 1 View

Zno nano particles colour changed from white to grey in process of calcination any suggestions?

In the formation of Zno nano particles process, after drying at 120 degree C, my zno nano particles are completely white but when i calcine it for 450 degree C it converts into grey colour. i...

26 February 2021 2,435 4 View

Florian Glodeanu

BJH method (Barrett, Joyner, and Halenda) is a procedure for calculating pore size distributions from experimental isotherms using the Kelvin model of pore filling.

http://adsorption.org/awm/ads/Meso.htm

http://adsorption.org/awm/ads/meso/BJH.htm

http://www.che.ncku.edu.tw/FacultyWeb/TengH/downloads/Porous%20Materials/chapter4.8.pdf

http://www.micromeritics.com/Repository/Files/ASAP_2020_Brochure.pdf

Fernando Vallejos-Burgos

Did you try having a look at the manual of your ASAP 2020? Everything is explained there.

Section 5.57 contains 6 pages explaining "BJH Adsorption/Desorption Report Options".