As a mechanical engineer, how do you prepare/response to a postdoct interview on phone or skype?

Olusegun D. Samuel @Olusegun_Samuel2

07 July 2018 0 8K Report

Dear All,

As a mechanical engineer, how do you prepare/respond to a postdoct interview on phone or skype?

Badges
Science topic

Similar topics
Engineering

More Olusegun D. Samuel's questions See All

Can inferior properties of crude biomass pyrolytic oil be attributed to the presence of polar compound?

Can basic inferior fuel related properties of crude biomass pyrolysis oil (BPO) be attributed to the presence of polar compound such as various oxygenates, nitrogen heterocycles and...

08 September 2019 4,766 4 View

What is the significance of additive in Oil Sands Recovery Processes?

What is the significance of additive in Oil Sands Recovery Processes? What is the role of Mechanical Engineer with the adoption of additive for recovery?

07 August 2019 6,559 3 View

How feasible is it to demonstrate solid fuel conversion and biodiesel modelling in program environments such as matlab, python and fortran?

How feasible is it to demonstrate solid fuel conversion and biodiesel production modelling in program environments such as matlab, python and fortran?

05 June 2019 4,547 4 View

What are the latest innovations in biodiesel production, hydrogen and fuel cells?

03 April 2019 4,905 3 View

What are the useful material and book for modeling biomass conversion processes using relevant tools (e.g., Aspen Plus)?

02 March 2019 7,865 3 View

As a Ph.D supervisor, how will guide your project students to investigate techo-economic study of CO2 capture in manufacturing industry?

As a Ph.D Supervisor, how will guide your project students to investigate CO2 capture and utilization in manufacturing industry via techno-economic tool?

01 February 2019 8,179 1 View

How can I adopt CFD, C++ and finite element to improve and model Li batery management for effective utilization?

How can I adopt CFD, C+ + and finite element to improve and model Li battery management for effective utilization? I would appreciate discussions on the technique of model tools, experimental...

01 February 2019 5,816 2 View

How will I develop and validate gas turbine combustors with Computational Fluid Dynamics (CFD) models?

Dear RG, How will I develop and validate gas turbine combustors with Computational Fluid Dynamics (CFD) models? Best Regards, Dr. O.D. SAMUEL

11 December 2018 1,853 4 View

Can cetane number of ethylic biodiesel production from oil (e.g coconut ethyl ester) be calculated from individual ethyl estters from a literature?

Dear RG, Literature has showed that cetane number (CN) of biodiesel e.g jatroha oil methyl can be calculated by CN =Xme (wt.%)XCNme; where CN is the cetane number of the biodiesel; Xme is the...

11 December 2018 8,575 5 View

What is the best way to teach CFD to undergraduate students in Department of Mechanical Engineering?

What is the best way to teach CFD/suitable lecture material to undergraduate students in Department of Mechanical Engineering?

11 December 2018 3,028 14 View

Geotechnical Engineering (Proceedings of the ICE) time review?

Hello everyone, I recently submitted an article to Geotechnical Engineering (Proceedings of the ICE), and the current status has been listed as "EiC Pre-assessment: Ready" for the past 20 days. I...

10 August 2024 6,493 1 View

What should a Mechanical Engineering PhD scholar focus on during their PhD to enhance their chances of securing a postdoctoral position?

29 July 2024 7,714 4 View

May I know the exact Quartile of the journal- Advanced Engineering Materials (Wiley) for material science category?

In some data sources it has been grouped in Q1 and some shows it is Q2.

29 July 2024 4,227 2 View

Ternary in Electrical Engineering?

Dear Research Community I would like to invite Elctrical Engineering specialists to solve problems related to Ternary Algebra or tripple sets I have an algorithm that places in relation three...

28 July 2024 5,771 2 View

What topic or subject does Production Engineering need to address more?

Contemporary scores or innovations in scientific approaches. Hybrid methodologies, emerging themes and cross-cutting issues?

27 July 2024 648 3 View

Can a shoot-through event of a tri-state digital buffer cause momentary Hi-Z state?

// interested in the difference between floating events and short circuits.

22 July 2024 6,565 0 View

Is there a good macro photography kit for on-site metallurgical investigation?

I am looking to purchase a photography kit for onsite metallurgical investigations, such as capturing photos of worn areas, hot tears, cold tears etc. Could anyone suggest me a good...

22 July 2024 3,490 2 View

Why do fish have fishy odors naturally ?

Chemical Engineering /Food Engineering

20 July 2024 4,152 4 View

What could be the possible reason that sintering of polycrystalline diamond fabricated with tape casting has suddenly started failing?

I make polycrystalline diamond with tape casting followed by HPHT sintering. When i sintered the samples up till May, the sintering was good. When i sintered the samples in June and July at the...

16 July 2024 3,212 5 View

What should I upgrade in my computer to speed up simulation in CST?

I want to reduce simulation time in CST for frequency domain solver by upgrading my computer. I already have discrete GPU but it doesn't seem to make any difference at all compared to integreted...

10 July 2024 2,789 4 View